IDA-5 Infusion Device Analyzer - 3 Pages

Add to MyMedicalExpo favorites
IDA-5 Infusion Device Analyzer

Catalog excerpts

IDA-5 Infusion Device Analyzer Fast. Accurate. Proven. Technical Data Ensure infusion pumps are tested accurately and quickly with the IDA-5 Infusion Device Analyzer. The IDA-5 is based on sophisticated measurement technology trusted by biomedical professionals around the world for over 20 years. The IDA-5 is a full-featured device that measures instantaneous flow, average flow, occlusion pressure and dual flow based on IEC60601-2-24. The IDA-5 has built-in automation allowing users to create custom test templates for quick, standardized infusion pump analysis with minimal user intervention. The IDA-5 test automation bundle includes Ansur software for comprehensive testing to IEC60601-2-24. Automated testing allows technicians to set up tests and walk away. It is easy to set up and requires little or no training to use. The IDA-5 can be used to test a wide variety of infusion pumps including volumetric pumps, syringe pumps, PCA pumps, drip-rate pumps, anesthesia pumps and ambulatory pumps. The IDA-5 maximizes productivity with multiple, independent channels for testing up to four infusion pumps at once. With its built-in memory, the IDA-5 records test results internally, and provides easy-to-read graphs right on the analyzer’s screen. Additionally, an auto-start feature simplifies syringe pump testing as well as other tests with long startup times. And the color display is so large numbers can be read from across the room. The IDA-5 also comes with Hydrograph PC software for creating full-color graphs and reports, and is compatible with plug ‘n play accessories such as barcode scanners, keyboards and printers. Key features • Tests up to four infusion pumps at the same time • Customizable test templates for quick and standardized testing • On-board and PC-based automation to fully test to IEC60601-2-24 testing requirements • Compatible with virtually any type of infusion device • Real time snap shots of flow and pressure for immediate issue recognition • Instantaneous and average flow measurement of up to 1500 ml/hr • Occlusion pressure measurements to 45 psi • Single-flow, dual-flow (piggyback) and PCA testing • Auto-start mode enables unit to begin testing only when fluid is detected to maximize accuracy • Ability to automatically end flow measurement based on user-defined time, volume or both • Convenient and easy data entry with plug ’n play, USB compatible keyboard or barcode scanner • Built-in memory to save test results for printing or downloading to computer • Optional Ansur automation software completely integrates medical device testing including electrical safety, visual inspection and other performance parameters for total digital data management • Global support network delivering prompt service worldwide

 Open the catalog to page 1

Specifications Technical specifications Flow rate measurement Method Flow is calculated by measuring volume over time Range 0.1 ml/h to 1500 ml/h (2600 ml/h is shown) Accuracy 1 % of reading ±1 LSD for flows of 16 to 200 ml/h for volumes over 20 ml, otherwise 2 % of reading ±1 LSD for volumes over 10 ml under laboratory conditions. Degassed water at 15 °C to 30 °C (59 °F to 86 °F) is recommended for long tests. Accuracy <16 ml/hr ml/hr and >1500 ml/hr not specified. Max test duration 100 hours Volume measurement Method Volume is measured directly by the measuring module in minimum sample...

 Open the catalog to page 2

Standard accessories IDA-5 HYDROGRAPH IDA-5 SYRINGE IDA-5 LUERLOCK IDA-5 DRAIN TUBE IDA-5 USB Cable Optional accessories IDA-5 KEYBOARD ANSUR IDA-5 IDA-5 UPGRD 1CH One-Channel Infusion Device Analyzer, US One-Channel Infusion Device Analyzer, Australia One-Channel Infusion Device Analyzer, Denmark One-Channel Infusion Device Analyzer, Shuko One-Channel Infusion Device Analyzer, Israel One-Channel Infusion Device Analyzer, Italy One-Channel Infusion Device Analyzer, India One-Channel Infusion Device Analyzer, Switzerland One-Channel Infusion Device Analyzer, UK One-Channel Infusion Device...

 Open the catalog to page 3

All Fluke Biomedical catalogs and technical brochures

  1. VT650

    5 Pages

  2. RaySafe Solo

    5 Pages

  3. INCU II

    4 Pages

  4. QA-ES III

    5 Pages

  5. PS320

    4 Pages

  6. DPM1B

    2 Pages

  7. 451B

    3 Pages

  8. 451P

    3 Pages

  9. INCU ?

    4 Pages

  10. 76-606DX

    2 Pages

  11. 190M

    8 Pages

  12. RaySafe Xi

    8 Pages

  13. RaySafe X2

    12 Pages

  14. ESA609

    4 Pages

  15. IDA-1S

    3 Pages

  16. ProSim 4

    6 Pages

  17. ESA615

    5 Pages

  18. VT305

    4 Pages

  19. ProSim

    8 Pages

Archived catalogs