QA-ES III - 5 Pages

Add to MyMedicalExpo favorites
QA-ES III

Catalog excerpts

QA-ES III Electrosurgical Analyzer Technical Data The QA-ES III Electrosurgical Analyzer simplifies testing to ensure the performance and safety of electrosurgical units. With generator output current accuracy as low as ± 2.5 %, the QA-ES III is capable of testing all modern high power electrosurgical units. Collect all measurements including vessel sealing, contact quality monitor (CQM), high frequency (HF) leakage and output power distribution in single or continuous mode. The QA-ES III has all hardware and software needed for complete testing, so you don’t need to carry additional accessories or cables. With all-in-one features, and wireless functionality*, the QA-ES III is one of the most user-friendly electrosurgical analyzers on the market today. Additionally, Ansur test automation software allows users to create and automatically run tests, capture data, and produce easy-to-read reports. Key features: • Test all critical ESU functions with precise power, current, frequency, crest factor and load resistance ranges • Collect measurements in single and continuous mode • Connect wirelessly via Bluetooth for easy record retrieval without interference or limitation by cables and wires* • Automatic power distribution measurement, including power, current, peak-to-peak voltage, and crest factor • All-in-one tool: all hardware and software necessary to complete preventive maintenance and troubleshooting is built in to the unit, eliminating the need to purchase or transport additional cables, leads, switch boxes and RECM box • User-friendly interface: large buttons and LCD screen guide the user through test sequences • Memory storage of up to 5,000 test records, eliminating the need to download data after the completion of each preventive maintenance or troubleshooting session • Complies to all global standards, including ANSI/ AAMI and IEC *Wireless capabilities not available in all countries. Ask your regional sales professional f

 Open the catalog to page 1

Modes of operation Continuous operation Continuous measurement of power, current, peakto-peak voltage (closed load only), and crest factor Single operation Single measurement after the set delay time of the ESU output of power, current, peak-to-peak voltage (closed load only), and crest factor Power distribution Automatic measurement of power, current, peakto-peak voltage (closed load only), and crest factor through a user-selectable load range RF leakage current Provides connections and load configurations to measure HF leakage from both grounded and isolated equipment CQM Perform “contact...

 Open the catalog to page 2

Specifications (continued) Safety IEC 61010-1 Overvoltage category II, pollution degree 2 Wireless module listing FCC (United States) compliant (Class A) IC (Industry Canada) compliant Measurements and tests specifications Measures Cut and coag waveforms, monopolar and bipolar outputs Power and current measurements Delay time for single measurements 0.2 seconds to 4.0 seconds from Foot Switch activation to start of measurement Duty cycle Variable load 10 seconds on, 30 seconds off, at 100 W, all loads Generator output measurements Load resistance Variable Power (0 W to 9.90 W ± 5 % + 1W, 10...

 Open the catalog to page 3

Specifications (continued) HF leakage current Fixed load Power rating Additional fixed load CQM test (Contact Quality Monitor) Resistances Power rating Auto time interval Oscilloscope Output 1 V per ampere of input current, typical Footswitch simulations Cut and Coag Communications USB device port Micro B connector, full speed Wireless port Memory Test records retained through power cycling Calibration Recommended cycle Traceable to the International System of Units (SI) through the appropriate National Metrology Institutes such as NIST or through intrinsic standards. Ordering information...

 Open the catalog to page 4

Ordering information (continued) 4680818 QA-ES MK III Electrosurgery analyzer, Japan, with Ansur Automation Software QA-ES MK III Electrosurgery analyzer, Australia, with Ansur Automation Software QA-ES MK III Electrosurgery analyzer, Brazil, with Ansur Automation Software QA-ES MK III Electrosurgery analyzer, US, non-wireless with Ansur Automation Software QA-ES MK III Electrosurgery analyzer, SCHUKO, non-wireless with Ansur Automation Software QA-ES MK III Electrosurgery analyzer, UK, non-wireless with Ansur Automation Software QA-ES MK III Electrosurgery analyzer, Japan, non-wireless...

 Open the catalog to page 5

All Fluke Biomedical catalogs and technical brochures

  1. VT650

    5 Pages

  2. RaySafe Solo

    5 Pages

  3. INCU II

    4 Pages

  4. PS320

    4 Pages

  5. DPM1B

    2 Pages

  6. 451B

    3 Pages

  7. 451P

    3 Pages

  8. INCU ?

    4 Pages

  9. 76-606DX

    2 Pages

  10. 190M

    8 Pages

  11. RaySafe Xi

    8 Pages

  12. RaySafe X2

    12 Pages

  13. ESA609

    4 Pages

  14. IDA-1S

    3 Pages

  15. ProSim 4

    6 Pages

  16. ESA615

    5 Pages

  17. VT305

    4 Pages

  18. ProSim

    8 Pages

Archived catalogs