Catalogs >
Fluke Biomedical >
QA-ES Series II

QA-ES Series II
4Pages

Catalog excerpts

Electrosurgery Analyzer Technical Data QA-ES Series II analyzes electrosurgical units quickly and accurately. A wide load-resistance range provides 128 user-selectable loads, including very low loads for testing many of today’s ESUs. An accuracy of ± 2 % of reading down to 20 mA guarantees reliable high-frequency leakage results. With capability to run an automatic-power-distribution test in as little as 1 minute, the QA-ES works fast so technicians save time. An Ansur QA-ES software plug-in allows users to create and automatically run tests, capture data, and produce easy-to-read reports with a PC. • Automatic power distribution measurement, including power, current, peak-to-peak voltage (closed load only), and crest factor Oscilloscope output • • High-frequency leakage measurements with accuracy of ± 2 % of reading • 128 internal user-selectable test loads from 10 Ω to 5200 Ω • Foot-switch output for triggering the ESU under test • Ansur QA-ES software plug-in for automated test protocols • Large display • RS-232 and Centronic-Printer interface

Open the catalog to page 1

Technical specifications Generator output Continuous operation Continuous measurement of power, current, peak-to-peak voltage (closed load only), and crest factor Single operation Single measurement after the set delay time of the ESU output of power, current, peak-to-peak voltage (closed load only), and crest factor Power distribution Automatic measurement of power, current, peakto-peak voltage (closed load only), and crest factor through a user-selectable load range RF leakage current Provides connections and load configurations to measure HF leakage from both grounded and isolated...

Open the catalog to page 2

Ordering Information Models 2649769 QA-ES Series II 115 V Electrosurgery Analyzer (US) 2651725 QA-ES Series II 230 V Electrosurgery Analyzer (Schuko) 2770445 QA-ES Series II 230 V Electrosurgery Analyzer (UK) 2770450 QA-ES Series II 230 V Electrosurgery Analyzer (Australia) 3096390 QA-ES Series II 100 V Electrosurgery Analyzer (Japan) Alphanumeric format Standard accessories Graphic mode Display control 5 F-keys, enter, cancel, control knob, and an encoder Data input/outputs Parallel printer port and bidirectional RS-232 Metal case Dimensions (WxDxH) 2716044 Manual on CD 2716032 Manual Hard...

Open the catalog to page 3

About Fluke Biomedical Fluke Biomedical is the world’s leading manufacturer of quality biomedical test and simulation products. In addition, Fluke Biomedical provides the latest medical imaging and oncology quality-assurance solutions for regulatory compliance. Today, biomedical personnel must meet the increasing regulatory pressures, higher quality standards, and rapid technological growth, while performing their work faster and more efficiently than ever. Fluke Biomedical provides a diverse range of software and hardware tools to meet today’s challenges. Fluke Biomedical Regulatory...

Open the catalog to page 4