Technical data ESA615 Electrical Safety Analyzer The ESA615 Electrical Safety Analyzer brings fast and simple automated testing to a portable analyzer for healthcare technology management professionals that perform electrical safety testing on medical equipment both in the field and in facilities. Whether it is simple testing or comprehensive analysis, the ESA615 can do it all. This multifaceted device performs all primary electrical safety tests, including line (mains) voltage, ground wire (protective earth) resistance, insulation resistance, device current, and lead (patient) leakage tests. It also offers ECG simulation and point–to-point voltage, leakage, and resistance tests. Versatile to global electrical safety standards of choice, ESA615 tests to ANSI/AAMI ES1, NFPA-99, IEC62353 (VDE751) IEC60601-1 (2nd and 3rd editions) and AS/NZS 3551. The ESA615 is an all-in-one solution with a safety analyzer and ECG simulator in a single test instrument. Key features • Portable, ergonomic design with an integrated handle and tilt stand • On-board automation with automated test sequences for easy compliance to key global electrical safety standards (ANSI/AAMI ES-1 (NFPA-99), IEC62353 (VDE751), IEC60601-1 2nd and 3rd editions, and AS/NZS 3551) • User-friendly interface for streamlined testing • ECG waveform tests and dual-lead measurements combine the functionality of a simulator and safety analyzer in a single test tool • Five applied parts jacks and easy ECG snap connection; optional expander box for up to 12-lead ECG testing • Easy data entry through barcode external keyboard or on-board keypad • 20 A at 120 V current capability • Replaceable mains fuses keep your unit in the field and out of the repair shop • Custom language selections include: English, French, German, Spanish, Italian and Portuguese • Rigorously tested for rugged field applications with CE and CSA in addition to Fluke-qualityruggedness for long-term reliability • Two-year extended warranty (no-cost available after first-year calibration at any authorized Fluke Biomedical Service Center) • Global support network delivering prompt service and peace of mind to Fluke Biomedi

Automated: Pre-set templates allow you to test to the global standard of your choices at the push of a button. Let the unit guide you through the test steps quickly and accurately in three simple steps: 1. Select the test sequence corresponding to your standard of choice 2. Initiate the automated test sequence. 3. Store the results on-board or wirelessly export to your PC in seconds. It is that easy. The automated test sequences are easily customized to suit individual testing requirements. Portable: The ESA615 is a small, lightweight analyzer with an integrated handle to carry from place to...

Frequency response/accuracy ± (1 % of reading + (1 μA or 1 LSD, whichever is greater)) ± (2 % of reading + (1 μA or 1 LSD, whichever is greater)) ± (4 % of reading + (1 μA or 1 LSD, whichever is greater)) ± (5 % of reading + (1 μA or 1 LSD, whichever is greater)) Accuracy for Isolation, MAP, Direct AP, Alternative AP, and Alternative Equipment leakage tests all ranges are: • At 120 V ac + (2.5 μA or 1 LSD, whichever is greater) • At 230 V ac additional ± 3.0 % and + (2.5 μA or 1 LSD, whichever is greater) For Alternative equipment, Alternative AP, and Direct AP leakage tests, the leakage values...

ECG performance waveforms Accuracy ±2% ± 5 % for amplitude of 2 Hz square wave only, fixed at 1 mV lead II configuration Ventricular fibrillation Square wave (50 % duty cycle) Sine wave Triangle wave Pulse (63 ms pulse width) Test standards Available selections Built-in test sequences IEC60601-1 3rd Edition Patient Monitor, Defibrillator, Infusion Pump, Ultrasound Device, Generic Device and System Patient Monitor, Defibrillator, Infusion Pump, Ultrasound Device and Generic Device Patient Monitor, Defibrillator, Infusion Pump, Ultrasound Device and Generic Device Patient Monitor, Defibrillator,...

Environmental Operating temperature Storage temperature Operating humidity 100/115 V ac mains supply voltage up to 5000 meters 230 V ac mains supply voltage up to 2000 meters Two-year extended warranty (no-cost, available after first-year calibration at any authorized Fluke Biomedical Service Center, otherwise standard one year warranty applies) Ordering information Models/descriptions 4132046 ESA615 US, 115 V with Ansur automation software ESA615 France/Belgium, 230 V with Ansur automation software ESA615 Europe, 230 V with Ansur automation software ESA615 Israel, 230 V with Ansur automation...

Getting Started Guide, hard copy, multilingual Data Transfer Cable USA/AUS/ISR Accessory Kit: test lead set, TP1 test probe set, AC285 alligator clip set (ESA T/L kit, country-specific, see below) USA/NEMA outlet to NBR14136 socket (Brazil only) Null Post Adapter 5-to-5 Banana Jack to ECG (BJ2ECG) Adapter (ESA612-2016) Carrying Case LINE CORD Country-specific power cord Ansur ESA615 Plug-in Software (Ansur automation software versions only) Accessory kits (country specific) 3111008 3111024 USA/AUS/ISR Accessory Kit: test lead set, TP1 test probe set, AC285 alligator clip set (ESA T/L kit, USA)...

About Fluke Biomedical Fluke Biomedical is the world’s leading manufacturer of quality biomedical test and simulation products. In addition, Fluke Biomedical provides the latest medical imaging and oncology qualityassurance solutions for regulatory compliance. Highly credentialed and equipped with a NVLAP Lab Code 200566-0 accredited laboratory, Fluke Biomedical also offers the best in quality and customer service for all your equipment calibration needs. Today, biomedical personnel must meet the increasing regulatory pressures, higher quality standards, and rapid technological growth, while...