MATERIAL DATA SHEET Flexible Flexible Resin for Ergonomic Features Use Flexible Resin to produce parts that bend and compress. Flexible is excellent for simulating soft-touch materials and adding ergonomic features to multi-material assemblies. Handles, grips, and overmolds Wearables prototyping To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.

1 Material properties can vary with part geometry, print orientation, print settings and temperature. 4 Compression testing was performed at 23 °C after aging at 23 °C for 22 hours. 2 Data was obtained from parts printed using Form 2, 100 pm, Flexible settings and post-cured with 80.5 mW/cm2 of 365 nm fluorescent light for 60 minutes. 5 Tear testing was performed after 3+ hours at 23 °C, using a Die C tear specimen and a 20 in/min cross head speed. 3 Tensile testing was performed after 3+ hours at 23 °C, using a Die C dumbbell and 20 in/min cross head speed. 6 Thermal testing was performed after...