*mymedicalexpo

Standard

Product catalog summary

Overview: This document is a material data sheet for Formlabs' photopolymer resins used in high-resolution rapid prototyping with Form 2 3D printers. It provides detailed specifications, material properties, and solvent compatibility information.

Material Specifications:

High-resolution resins designed for capturing fine features in models.
Resins provide strength and precision, suitable for rapid prototyping and product development.
Parts printed have a smooth surface finish, resembling final products.
Available in Clear (FLGPCL04), White (FLGPWH04), Grey (FLGPGR04), Black (FLGPBL04), and Color (FLGPCB01).

Material Properties:

Tensile Properties: Ultimate tensile strength is 38 MPa (green) and 65 MPa (post-cured). Tensile modulus is 1.6 GPa (green) and 2.8 GPa (post-cured). Elongation at failure is 12% (green) and 6.2% (post-cured).
Flexural Properties: Flexural modulus is 1.25 GPa (green) and 2.2 GPa (post-cured).
Impact Properties: Notched IZOD impact strength is 16 J/m (green) and 25 J/m (post-cured).
Temperature Properties: Heat deflection temperature at 264 psi is 42.7°C (green) and 58.4°C (post-cured); at 66 psi is 49.7°C (green) and 73.1°C (post-cured).

Solvent Compatibility:

Minimal weight gain (<1%) in most solvents including acetic acid, isopropyl alcohol, and mineral oils.
Acetone causes sample cracking; strong acids cause distortion.
Diethyl glycol monomethyl ether shows a 1.7% weight gain.

Notes:

Material properties can vary based on part geometry, print orientation, settings, and temperature.
Data obtained from green parts and post-cured parts using specific settings and conditions.

Catalog excerpts

MATERIAL DATA SHEET Standard Materials for High-Resolution Rapid Prototyping High Resolution. For demanding applications, our carefully-engineered resins capture the finest features in your model. Strength and Precision. Our resins create accurate and robust parts, ideal for rapid prototyping and product development. Surface Finish. Perfectly smooth right out of the printer, parts printed on the Form 2 printer have the polish and finish of a final product. To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.

Open the catalog to page 1

FORMLABS MATERIAL PROPERTIES - STANDARD: Photopolymer Resin for Form 2 3D Printers

Open the catalog to page 2

Standard

Standard

Catalog excerpts

All Formlabs catalogs and technical brochures