MilkoStream™ FT brochure
8Pages

{{requestButtons}}

Catalog excerpts

MilkoStream™ FT brochure - 1

The MilkoStream™ FT in-line analyser measures five key parameters of liquid milk directly in the process pipe. MilkoStream™ FT uses the best analytical technology for milk standardisation, Fourier Transform Infrared (FTIR), to give an accurate picture of what is going on inside the process at any time. Armed with this information you can improve the efficiency of your milk standardisation for an immediate payback in terms of improved product consistency and reduced production variation.

Open the catalog to page 1
MilkoStream™ FT brochure - 2

Reduce production variation by more than 20% with real-time MilkoScan results It is simple to install with interface to all major PLCs and Scada systems. And you can start saving straight away. Only a few samples are required to adjust the solution to your production. The MilkoStreamTM FT hardware is built for solid performance with minimal maintenance. There is no flow system because the probe intercepts the normal milk flow. Self-diagnostic software alerts to any potential failures and remote surveillance to ensure high up time. Comprehensive preventive maintenance agreements are...

Open the catalog to page 2
MilkoStream™ FT brochure - 3

Technology Purpose built FTIR unit for reliable analysis operations MilkoStreamTM FT is an in-line process instrument designed for protein and fat standardisation of liquid milk. It takes little space and can be easily installed in the process pipe. In-line Fourier transform infrared technology (FTIR) sampling and tests are easy to perform with no risk of operator error. The FTIR interferometer scans the full mid-infrared spectrum so that analysing new products and parameters is only a matter of calibration development. Based on the spectra a qualification model can be made to monitor that...

Open the catalog to page 3
MilkoStream™ FT brochure - 4

Instrument standardisation and calibration transferability MilkoStream™ instruments are factory standardised for high stability and for the same results on multiple instruments. Ready-made calibrations are based on the extensive FOSS chemometrics knowledge built-up over more than fifty years. Simple to use software The MilkoStream™ FT runs on the easy-to-use ISIscan™ Nova software and can be connected to PLC or Scada systems. IP66 Cabinet The cabinet protects against the environment (IP66) and acts as a container for the interferometer, power supply. It is mounted using a clamp, giving...

Open the catalog to page 4
MilkoStream™ FT brochure - 5

Extended warranty on new instruments with a FossCare agreement Secure your investment with a FossCare™ Support Agreement Let FOSS take care of you for a maximum return on your analytical investment. Get a four year warranty as part of the new FossCare Premium Preventive Maintenance Agreement or two years as part of any other FossCare agreement. In addition to the peace of mind afforded by the warranty period, the continual preventive maintenance pays off by keeping your analytical instruments working perfectly every day, year after year. Why preventive maintenance? As with any analytical...

Open the catalog to page 5
MilkoStream™ FT brochure - 7

Standards and approvals MilkoStreamTM FT is CE labeled and complies with the following directives and regulations: Directives: • Low Voltage Directive 2014/35/EU • Electro Magnetic Compatibility Directive 2014/30/EU • Waste Electrical and electronic Equipment (WEEE) 2002/96/EC • Packaging and packaging waste directive 94/62/EC Regulations and legislations (within EU): • REACH Regulation (EC) No. 1907/2006 (EU Chemcial legislation) • EU Regulation (EC) No. 1935/2004 (materials and articles intended to come into contact with food) • GMP Regulation (EC) No 2023/2006 (good manufacturing...

Open the catalog to page 7
MilkoStream™ FT brochure - 8

IMPROVE YOUR MILK STANDARDIZATION BY MORE THAN 20% WITH REAL-TIME MILKOSCAN RESULTS • Move your fat and protein targets closer to specification by reducing production variation by more than 20%  Gain new insight with a measurement every seven seconds from the new Patented Dynamic Diamond probeTM (the world’s first true and only in-line FTIR analyser) • Get in-line measurements with MilkoScan performace (comparable to individual measurements from gold standard MilkoScan FT 120, MilkoScan FT1 and MilkoScan FT2 instruments • Avoid the need for sample bypass flow system with high maintenance...

Open the catalog to page 8

All FOSS catalogs and technical brochures