Product data sheet Product description Snap-In Male cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP54 Scale drawing You can find the assembly instructions on the next page. Technical data Connector design Version Connector locking system Termination Degree of protection Connection cross-section Cable outlet Temperature range from/to Mechanical operation Weight (g) Customs tariff number Country of Origin CHED Male cable connector Connector pin straight snap-in solder Electrical parameters Rated voltage 150 V Rated impulse voltage 1500 V Insulating material group II

Product data sheet Product description Snap-In Male cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP54 Material Housing material Contact body material Contact material Contact plating REACH SVHC SCIP number PFAS present CuZn (brass) Assembly instructions 1. Abmanteln auf L = 20mm. Ummantelung obstreifen. 2. Druckschraube, Klemmkorb, Dichtring und Kupplungshulse auf Kabel auffadeln. 5. Kupplungshulse ausrichten und mit dem Kontakt-korper verrosten. Entriegelung nur mit Losewerk-zeug 07-0002-000 moglich. 6. Den Klemmkorb Ober den Dichtring bis auf An-schlcg scbieben und mit der...

Product data sheet Connectors for medical applications Product description Snap-In Male cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP54 Security notices The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. To protect against unintentional opening of the connector, the thread between...