SPECIALIST FOR CIRCULAR CONNECTORS M8 FOR SPACE SAVING INSTALLATIONS As an alternative to M12, there are now also M8 connectors for data transmission in network cabling. M8 CONNECTORS WITH D-CODING M8 connectors require up to thirty percent less installation space than comparable M12 connectors. The M8 D-coded connectors are predestined for Industrial Ethernet applications. Users who want to future-proof their network are ideally equipped with these Power over Ethernet plus (PoE+) capable connectors. Communication protocols such as Ethernet/IP or Profinet according to IEEE 802.3 are reliable...

FEATURES ■ Screw locking according to DIN EN 61076-2-114 ■ Data transmission up to 100 Mbit/s ■ Field-wireable, moulded, straight and angled panel mount connectors ■ Data transmission and power supply ■ 30 percent less installation space than M12 ■ Ethernet applications, Profinet surroundings ■ Future-proof network PoE+

SECTORS AND FIELDS OF APPLICATION M8-D circular connectors are needed to automate production plants, buildings or infrastructure facilities. They are used for data communication to allow controllers and production control computers or sensors and actuators to communicate with each other via protocols such as Ethernet/IP or Profinet. Other applications are for image processing systems, sensors, Ethernet switches and gateway devices. Automation technology Ethernet switches Image processing systems Gateway devices Data communication Sensor technology

■ M8 Automation Technology D-Coding 818 Series • Connectors with screw locking acc. to DIN EN 61076-2-114 • 4 contacts with symmetrical arrangement • Data transmission up to 100 Mbit/s

■ Field-wireable, moulded, straight and angled panel mount connectors ■ Ethernet applications, Profinet surroundings ■ 30 percent less installation space than M12 ■ Data transmission and power supply ■ Future-proof network PoE+

818 M8-D Male cable connector, screw clamp termination, iris type spring, shieldable Male cable connector, screw clamp termination, iris type spring, shieldable Female cable connector, screw clamp termination, iris type spring, shieldable Female cable connector, screw clamp termination, iris type spring, shieldable

Male panel mount connector, front fastened, dip solder, with shielding sheet Male angled panel mount connector, front fastened, dip solder, with shielding sheet Female panel mount connector, front fastened, dip solder, with shielding sheet Female angled panel mount connector, front fastened, dip solder, with shielding sheet Drilling scheme see page 15 Drilling scheme see page 15 Drilling scheme see page 15 Drilling scheme see page 15 Thickness of PCB: <1,75 mm Hexagon nut enclosed loose Thickness of PCB: <1,75 mm Hexagon nut enclosed loose Thickness of PCB: <1,75 mm Hexagon nut enclosed loose...

Male cable connector, moulded, Ethernet cable Female cable connector, moulded, Ethernet cable 11 Comparable AWG conductors see technical Information. 21 Standard cable length is 2 m/5 m. Other lengths upon request.

818 M8-D Male cable connector M8 x 1 -Female cable connector M8 x 1 11 Comparable AWG conductors see technical Information, 21 Standard cable length is 2 m/5 m. Other lengths upon request.

Automation Technology Assembly instruction Cable connectors, shieldable, screw clamp connection, iris type spring Shielding braid diameter > 3,5 mm 1. Bead pre-assembled housing to cable (consisting of: assembled sleeve, seal and pressing screw). 2. Dismantle cable, strip single wires, shorten shielding braid. (Wrap with copper tape if necessary) 3. Screw on single wires. 4. Screw sleeve to male/female insert. 5. Tighten pressing screw. Shield-diameter > 3,5 mm female insert, assembled pressing screw sleeve, assembled insulating sleeve male insert, assembled Shielding braid diameter ≤ 3,5 mm...

Automation Technology Contact arrangements M8-D Female insert (mating side) Male insert (mating side) yellow white orange blue Drilling schemes male insert (PCB), shielding sheet yellow white orange blue Drilling schemes female insert (PCB), shielding sheet Panel cut out 1) Panel mount connectors, front fastened With flats as anti-rotation device With thread to screw in With bore hole 0,5 x 45° Attention: Installation proposals are valid for M8-D panel mount connectors with thread. Tightening moment Metal housing 1 Nm Plastic housing 1 Nm

Accessories Automation Technology 818 M8-D Protection cap for male panel mount connector Protection cap for male panel mount connector, front fastened

PICTURES: SHUTTERSTOCK, FOTOLIA, ISTOCK, STEFFEN WALTER STUDIOS

Franz Binder GmbH & Co. Elektrische Bauelemente KG [email protected] www.binder-connector.de Specifications may be changed without notice, errors excepted. AGB: www.binder-connector.com/en/terms