Introduction
The document introduces the new compact FCR (Fujifilm Computed Radiography) system, emphasizing its optimal imaging capabilities based on extensive experience.

Specifications
The FCR CAPSULA X Image Reader (Model: CR-IR 357) is the standard component, along with an AC power cord. Other system components include IP cassette types CC and LC, a CR Console, and Image Recorders (DRYPIX 1000/3000/4000/7000).

Imaging Plate and Cassette Details
Imaging plates are available in various sizes, both in inch and metric settings. IP cassettes come in types CC and LC, with specific dimensions provided for each type.

Performance and Processing Capacity
The time to print on DRYPIX 7000 through the network via CR Console is approximately 135 seconds for a 35 ✕ 43 cm image. Display times on the CR Console vary by size, with a 35 ✕ 43 cm image taking approximately 52 seconds and an 18 ✕ 24 cm image taking approximately 31 seconds. The processing capacity is detailed with times required for IP feed/load and the number of IPs processed per hour.

Technical Specifications
The FCR CAPSULA X has one stacker, reads in 12-bit gray scale, and supports 10 Base T/100 Base TX network connections. Its dimensions are 590 ✕ 380 ✕ 810 mm, and it weighs 99 kg. Power supply conditions require a single-phase 50-60Hz, 120-240V ±10%, and a maximum of 5A.

Environmental Conditions
Operating conditions include a temperature range of 15-30°C and humidity of 15-80%RH without dew condensation. Non-operating conditions allow for a temperature range of 0-45°C and humidity of 10-90%RH, also without dew condensation.