FCR PRIMA T2 Specifications Standard Components FCR PRIMA T2 Image Reader (Model: CR-IR 392) Applicable Console FCR PRIMA Console, FCRView, CR Console, Console Advance Main Connectable Imagers DRYPIX PRIMA/Smart/ Lite/ Plus/4000 Time Required for IP Feed/ Load Processing Capacity Reading Specification Time to Start on Display Time to Print on DRYPIX PRIMA Approx. 165 sec. (Approx. 155 sec.)* in case of 35 43cm (14” 17”) Power Supply Conditions Environmental Conditions Operating Conditions: • Temperature: 15- 30 °C • Humidity: 15-80 %RH (No dew condensation) • Atmospheric pressure: 750-1060 hPa Extremely fast processing in a compact body streamlines diagnosis Tabletop size *In the high speed mode This equipment is a Class 1 laser product (IEC60825-1:2001). Imaging Plate 26-30, NISHIAZABU 2-CHOME, MINATO-KU, TOKYO 106-8620, JAPAN Specifications are subject to change without notice. All brand names or trademarks are the property of their respective owners. In some countries, regulatory approval may be required to import medical devices. For the availability of these products, please contact your local sales representatives. (SK·13·02·F1079·F9711) Printed in Japan ©2013 FUJIFILM Corporation

This compact table-top reader unit has outstandingly high-speed processing capability to challenge the common misconception of CR High-Speed Processing FCR PRIMA T2 is a table-top reader unit which boasts a world-class high processing speed of 73 IPs/hour. In the high speed mode (5 pixels/mm), throughput is enhanced almost 70% compared with FCR PRIMA T (only for IPs of 14” 17” and 14” 14”). As with all Fujifilm equipment FCR PRIMA T2 is easy to operate. It will help reduce patient waiting time and greatly increase the efficiency of examination workflow. 73 IPs/hr. Throughput increased about 30%...