F U JI F I L M F CR VE LO CI TY T S PE CIFICATIO NS Network: 10 Base T/100 Base T Standard Components (some items are sold separately): • FCR VELOCITY T Table-type Image Reader (CR-IR 364 T) • AC Power Cord • Grid: 12:1, 10:1, 8:1 (density 36 lines/cm, focal distance 100cm) Other System Components: • CR Console Plus /Lite (Plus is recommended) • Image Recorder: DRYPIX 2000 /4000 /7000 Dimensions: • Table Top Size: 2350mm ✕ 810mm (93” ✕ 32”) • Table Height: 650 – 850mm (26” – 34”) • Control Unit (W ✕ D ✕ H): 260 ✕ 550 ✕ 470mm (10” ✕ 22” ✕ 19”) • Power Supply Unit (W ✕ D ✕ H): 500 ✕ 400 ✕ 475~495mm (20” ✕ 16” ✕ 19~20”) Weight: • Table-type Image Reader: 471kg (1039lbs.) • Control Unit: 21kg (46lbs.) • Power Supply Unit: 45kg (99lbs.) Processing Capacity: Approx. 140 IPs / hour. Achieved under the following exposure combination: Lumbar Spine (Front/Lateral) 40%, Abdomen (Spine) 20%, Upper and Lower Extremity Bones 40%. Power Supply Conditions: Single phase 50 / 60Hz 200 / 220 /230 /240V ±10% Approx. 2.0KVA Environmental Conditions: • Operating Conditions: Temperature: 15 – 30°C Humidity: 40 – 80%RH (No dew condensation) • Non-operating Conditions: Temperature: 0 – 45°C Humidity: 10 – 90%RH (No dew condensation) Note: processing capacity varies depending on the maximum amount of X-ray exposure dose reaching the built-in IP inside VELOCITY T. Reading Gray Scale: 12 bits FUJI COMPUTED RADIOGRAPHY Image Reading (1) Reading gray scale 12 bit/pixel Output gray scale 10 bit/pixel (2) Reading specification All images are read at the rate of 12 bit/pixel and image densities listed in the table below are applied respectively for each image size when output from the CR Console. Reading Size Effective Reading Size (mm) Radiographic Examination Stand Controller unit 757 (30) Power Supply Unit Exposure Unit Cable length of Connection: 7500 (295) as follows Cable length of Connection: 2400 (95) as follows The elevating unit can support the weight up to approx. 230kg (507lbs.), and weight up to approx. 50kg (110lbs.) is supported when the patient is on the edge of the table. High Pixeldensity Spatial Resolution (pixels/mm) Standard Pixeldensity Spatial Resolution (pixels/mm) “Image Intelligence™” is a set of sophisticated digital image-processing software technologies that are incorporated in the FCR VELOCITY T. Specifications and PC requirements are subject to change without notice. All brand names or trademarks are the property of their respective owners. All products require the regulatory approval of the importing country. For details on their availability, contact our local representative. (SK·07·03·F1120·F4FLL) Printed in Japan ©2007 FUJIFILM Corporation Superb image quality, with compact, table-type convenience.

HD LINESCAN technology in a fully adjustable table creates the complete work environment. The VELOCITY T is the ideal choice for digital supine-position examinations. Patients as well as HD LINESCAN Technology FCR VELOCITY T image acquisition uses revolutionary new HD LINESCAN technology employing a wide-view CCD and built-in Deviced IP. The detector unit is significantly slimmer than previous models, yet with increased throughput without sacrificing image quality. operators will appreciate the versatile tabletop, which adjusts vertically to ease mounting and dismounting, and horizontally to...

F U JI F I L M F CR VE LO CI TY T S PE CIFICATIO NS Network: 10 Base T/100 Base T Standard Components (some items are sold separately): • FCR VELOCITY T Table-type Image Reader (CR-IR 364 T) • AC Power Cord • Grid: 12:1, 10:1, 8:1 (density 36 lines/cm, focal distance 100cm) Other System Components: • CR Console Plus /Lite (Plus is recommended) • Image Recorder: DRYPIX 2000 /4000 /7000 Dimensions: • Table Top Size: 2350mm ✕ 810mm (93” ✕ 32”) • Table Height: 650 – 850mm (26” – 34”) • Control Unit (W ✕ D ✕ H): 260 ✕ 550 ✕ 470mm (10” ✕ 22” ✕ 19”) • Power Supply Unit (W ✕ D ✕ H): 500 ✕ 400 ✕ 475~495mm...