FUJIFILM FCR Go 2 Specifications DIMENSIONS Model name: FCR-MB 201 Power supply: Charger • 100 V Type: 100 /110 /120 V AC 10% Single phase: 50-60Hz Power consumption 0.7 kVA • 200 V Type: 220 / 230 / 240 V AC 10% Single phase: 50-60Hz Power consumption 0.7 kVA FUJI COMPUTED RADIOGRAPHY X-ray output: • Max. rating: 32 kW • Tube voltage: 40 to 130 kV in 1 kV steps • Tube Current: Max 400 mA (for 80 kV at 5m As or less) Processing Capacity Approx. 62 (87) IPs/hr. X-ray tube: • Nominal Focal spot size: 0.6 /1.2 • Maximum anode heat capacity: 100kJ (140kHU) • Target angle: 17 degrees • In the table above, figures in parentheses represent numbers of IPs processed at high-speed mode. Reading Gray Scale: 12 bits/pixel ACCESSORIES (Optional) I Type LC (Long view cassette)** Long-view double cassette Inch settings: 14” 17” and 10” 12” Metric settings: 24 30 cm Long-view triple cassette Inch: 14” 17”, 14” 14” and 10” 12” Readable IP types and sizes I ST-VI (Standard type) Inch settings*: 14” 17”, 14” 14”, 10” 12”, 8” 10”, 15 30 cm Metric settings*: 35 43 cm, 35 35 cm, 18 24 cm, 24 30 cm, 15 30 cm I Barcode reader and Barcode reader holder I Remote hand switch I ST-VN (Standard type) Inch settings*: 14” 17”, 14” 14”, 10” 12”, 8” 10” Metric settings*: 35 43 cm, 35 35 cm, 18 24 cm, 24 30 cm * Inch and metric sizes cannot be used simultaneously. ** When Type LC is used, the Auto-image composition optional software is necessary. Environmental Conditions: • Operating Conditions: Temperature: 15-30 °C Humidity: 15-80 %RH (No dew condensation) • Non-operating Conditions: Temperature: 0-45 °C Humidity: 10-90 %RH (No dew condensation) This equipment is a Class 1 Laser product (IEC60825-1). Specifications are subject to change without notice. All brand names or trademarks are the property of their respective owners. All products require the regulatory approval of the importing country. For details on their availability, contact our local representative. (Note: 200V Type only) (SK·11·01·F1120·F9711) Printed in Japan ©2011 FUJIFILM Corporation FCR Go 2 gathers smiles anytime, anyplace, anywhere.

A flexible and high-performance digital portable X-ray unit, all you need is the FCR Go 2. The FCR Go 2 offers you the capacity to make X-ray exposures and to preview images quickly and accurately just about anywhere. Whether it’s at the bedside, in the operating room or within intensive care settings the FCR Go 2 lessens the inconveniences often experienced whilst making “the rounds”. This system truly enhances efficiency by responding to diverse hospital needs. Highly Mobile Flexible Exposure User Friendly The telescopic arm adjusts easily to the precise, desired position. The arm also has...

FUJIFILM FCR Go 2 Specifications DIMENSIONS Model name: FCR-MB 201 Power supply: Charger • 100 V Type: 100 /110 /120 V AC 10% Single phase: 50-60Hz Power consumption 0.7 kVA • 200 V Type: 220 / 230 / 240 V AC 10% Single phase: 50-60Hz Power consumption 0.7 kVA FUJI COMPUTED RADIOGRAPHY X-ray output: • Max. rating: 32 kW • Tube voltage: 40 to 130 kV in 1 kV steps • Tube Current: Max 400 mA (for 80 kV at 5m As or less) Processing Capacity Approx. 62 (87) IPs/hr. X-ray tube: • Nominal Focal spot size: 0.6 /1.2 • Maximum anode heat capacity: 100kJ (140kHU) • Target angle: 17 degrees • In the table...