SX800
8Pages

Catalog excerpts

HIGH-END CAMERA THE NEW FUJINON SX800. THE BEST OF BOTH.

ADVANCED SAFETY SECURITY AND QUALITY Serial communications FUJIFILM has brought together its optical technology, developed over many years, and unique image processing technology to offer a new solution in long-range surveillance systems. Supporting various interfaces to enable diverse system administration The SX800 supports both serial communications [RS485] and IP communications [ONVIF] so that it can be incorporated into customers’ existing systems in place. The RS485 protocol supports Pelco-D / Pelco-P* and can be down- Pelco-D/P compatible remote controller HDMI HD-SDI VIDEO Remote...

Open the catalog to page 2

Mobile system HD-SDI VIDEO ONVIF-compatible remote controller Remote controlled platform SX800 RS485 (Pelco-D/P) connection Rear panel

Open the catalog to page 3

EVOLVING SYSTEMS AND TECHNOLOGIES Long-range surveillance 40x optical zoom The SX800 is equipped with a 40x optical zoom lens that covers a broad range of focal lengths from 20mm on the wide angle end to 800mm on the telephoto end. It is complemented with 1.25x digital zoom to achieve long-range surveillance equivalent to 1000mm in focal length. High-performance image stabilization New image stabilization system The SX800 combines optical image stabilization (OIS) and In the EIS mode, the SX800 uses a sensor large electronic image stabilization (EIS) to accurately compensate enough for its...

Open the catalog to page 4

High-speed AF system On-sensor phase detection AF The on-sensor phase detection AF uses phase detection pixels across the sensor to instantaneously measure distance according to the displacement of incident lights. The SX800 also offers “contrast AF”, which detects areas of high contrast in images at high accuracy, and automat- ically switches to the optimum AF setting. 1. Micro lens 2. Color filter 3. Phase detection filter 4. Phase detection pixels 5. Photo diode 4 Rear focus mechanism The use of the Rear Focus mechanism has significantly reduced the weight of the focusing lens group....

Open the catalog to page 5

Simplified setup Camera with built-in lens New design with advanced rigidity and portability Conventional surveillance systems require the adjustment of The SX800’s aluminum extrusion body is highly rigid and optical axis and flange focal length when mounting a lens on exceptionally robust. A carrying handle may be attached to a camera. The SX800, which carries a built-in lens, is shipped the body, using screw holes at the top, for transporting con- with such settings optimally adjusted to bring out maximum performance. The design also eliminates the need for complicated wiring, thereby...

Open the catalog to page 6

MAIN SPECIFICATIONS OF THE LONG-RANGE SURVEILLANCE SYSTEM SX800 Effective sensor size Model name Minimum illumination Optical zoom Focus settings Continuous AF, Quick AF, Manual Digital zoom Auto, Manual (Aperture range : F4 – F16) Focal length Shutter speed Auto (with minimum speed selection of 1/8 – 1/125s), Manual (1 – 1/20,000s) Maximum aperture ratio Manual, AGC, HYPER-AGC (Setting range: ISO400 – 819200) Optical filter Visible Light Cut filter (ON / OFF) Auto, Manual Wavelengths selection Image stabilization Network protocols ICMP, ARP, TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DHCP,...

Open the catalog to page 7

Specifications are subject to change without notice. 08/19 FUJIFILM Optical Devices Europe GmbH Fujistr. 1, 47533 Kleve, Germany Tel: +49 (0) 2821 / 7115-400, Fax: +49 (0) 2821 / 7115-200 E-mail: cctv_eu@fujifilm.com http://www.fujifilm.eu/fujinon

Open the catalog to page 8

SX800 8Pages

Catalog excerpts

All FUJIFILM Healthcare catalogs and technical brochures

SX800
8Pages