F U JI F I L M DR VE L O CI TY Tf p S PE CIFICATIO NS Dimensions: • Table Top Size: 2350mm ✕ 810mm (93” ✕ 32”) • Table Height: 650 – 850mm (26” – 34”) • Control Unit (W ✕ D ✕ H): 260 ✕ 550 ✕ 470mm (10” ✕ 22” ✕ 19”) • Power Supply Unit (W ✕ D ✕ H): 500 ✕ 400 ✕ 475 – 495mm (20” ✕ 16” ✕ 19” – 20”) Standard Components (some items are sold separately): • FUJIFILM DR VELOCITY Tfp Table-type Image Reader (CR-IR370) • AC Power Cord • Grid: 12:1, 10:1, 8:1 (density 36 lines/cm, focal distance 100cm) Other System Components: • CR Console Plus /Lite (Plus is recommended) • Image Recorder: DRYPIX 2000 /4000 /7000 Weight: • Table-type Image Reader: 471kg (1039lbs.) • Control Unit: 21kg (46lbs.) • Power Supply Unit: 45kg (99lbs.) Processing Capacity: Approx. 140 IPs / hour. Achieved under the following exposure combination: Lumbar Spine (Front/Lateral) 40%, Abdomen (Spine) 20%, Upper and Lower Extremity Bones 40%. Environmental Conditions: • Operating Conditions: Temperature: 15(at 40%RH) – 30°C(at 80%RH) Humidity: 40(at 15°C) – 80%RH(at 30°C) [No dew condensation] Atmospheric pressure: 650 – 1060 hPa • Non-operating Conditions: Temperature: 0 – 45°C Humidity: 10 – 90%RH [No dew condensation] Atmospheric pressure: 650 – 1060hPa Note: processing capacity varies depending on the maximum amount of X-ray exposure dose reaching the built-in IP inside VELOCITY Tfp. Network: 10 Base T/100 Base T Note: Keep the temperature at 30°C and humidity less than 80%RH if the non-operating period is less than a week and 30°C and less than 60%RH if over a week. An innovative DR realizing high image quality with less X-ray dosage Image Reading (1) Reading gray scale 12 bit/pixel Output gray scale 10 bit/pixel (2) Reading specification All images are read at the rate of 12 bit/pixel and image densities listed in the table below are applied respectively for each image size when output from the CR Console. Reading Size Effective Reading Size (mm) Spatial Resolution (pixels/mm) Spatial Resolution (pixels/mm) High Pixeldensity Radiographic Examination Stand Controller unit 757 (30) Power Supply Unit Cable length of Connection: 7500 (295) as follows Cable length of Connection: 2400 (95) as follows The elevating unit can support the weight up to approx. 230kg (507lbs.), and weight up to approx. 50kg (110lbs.) is supported when the patient is on the edge of the table. Standard Pixeldensity Specifications and PC requirements are subject to change without notice. All brand names or trademarks are the property of their respective owners. All products require the regulatory approval of the importing country. For details on their availability, contact our local representative. (SK·07·03·F1120·F9711) Printed in Japan ©2007 FUJIFILM Corporation

The new table-type FUJIFILM DR with enhanced DQE provides optimum image quality for diagnosis. “Digital Suite” VELOCITY Tfp, VELOCITY Ufp and Console for further flexibility FUJIFILM’s DR VELOCITY Tfp is a convenient supine-position digital radiography device that uses a columnar crystal X-ray detector attaining twice the DQE (Detective Quantum Efficiency) of VELOCITY Tfp and VELOCITY Ufp plus CR Console “Digital Suite” expand flexibility in the radiography room with the dual capability of reading. Exposure data can be received from an X-ray controller*. current FUJIFILM products. Its significantly...

F U JI F I L M DR VE L O CI TY Tf p S PE CIFICATIO NS Dimensions: • Table Top Size: 2350mm ✕ 810mm (93” ✕ 32”) • Table Height: 650 – 850mm (26” – 34”) • Control Unit (W ✕ D ✕ H): 260 ✕ 550 ✕ 470mm (10” ✕ 22” ✕ 19”) • Power Supply Unit (W ✕ D ✕ H): 500 ✕ 400 ✕ 475 – 495mm (20” ✕ 16” ✕ 19” – 20”) Standard Components (some items are sold separately): • FUJIFILM DR VELOCITY Tfp Table-type Image Reader (CR-IR370) • AC Power Cord • Grid: 12:1, 10:1, 8:1 (density 36 lines/cm, focal distance 100cm) Other System Components: • CR Console Plus /Lite (Plus is recommended) • Image Recorder: DRYPIX 2000 /4000...