F U JI F I L M DR VE L O CI TY U f p S PE CIFICATIO NS Standard Components (some items are sold separately): • FUJIFILM DR VELOCITY Ufp Upright Image Reader (Model: CR-IR366) • AC Power Cord • Grid: 12:1, 10:1, 8:1 (density 36 lines/cm, focal distance 140cm or 180cm) Reading Gray Scale: 12 bits Network: 10 Base T/100 Base T Other System Components: • CR Console Plus/Lite (sold separately) • Image Recorder : DRYPIX 2000 /4000 /7000 Dimensions (W ✕ D ✕ H): • Upright Image Reader: 645 ✕ 450 ✕ 1835mm (25” ✕ 18” ✕ 72”) • Control Unit: 260 ✕ 550 ✕ 470mm (10” ✕ 22” ✕ 19”) Processing Capacity (in the high-pixel density two-image output format): When connected to DRYPIX 7000/CR Console Plus Approx. 240 IPs/hour* * When operating environment is 25°C, and maximum x-ray amount for the device IP is 12mR. This figure will vary when temperature and x-ray amount differ. Environmental Conditions: • Operating Conditions: Temperature: 15(at 40%RH) – 30°C(at 80%RH) Humidity: 40(at 15°C) – 80%RH(at 30°C) [No dew condensation] Atmospheric pressure: 650 – 1060 hPa • Non-operating Conditions: Temperature: 0 – 45°C Humidity: 10 – 90%RH [No dew condensation] Atmospheric pressure: 650 – 1060hPa Time Interval Required Between Exposures: 10 seconds (varies depending on condition) Time to print on DRYPIX 7000 (14” ✕ 17”): 80 seconds Time To Display On CR Console: 9 seconds An advanced DR offering high-quality images with less X-ray exposure Note: Keep the temperature at 30°C and humidity less than 80%RH if the non-operating period is less than a week and 30°C and less than 60%RH if over a week. Image Reading Reading Sampling Rate Standard Density Scanning Density (pixels/mm) High-pixel Density Reading Size Effective Reading Size (mm) Scanning Density (pixels/mm) Pixel Size Pixel Size Images are read at the rate of 12pixels/mm and image densities listed in the table are applied respectively for each image size when output from the CR Console. Specifications and PC requirements are subject to change without notice. All brand names or trademarks are the property of their respective owners. All products require the regulatory approval of the importing country. For details on their availability, contact our local representative. (SK·07·03·F1120·F9711) Printed in Japan ©2007 FUJIFILM Corporation

The new FUJIFILM DR provides premium image quality through optimized resolution and DQE. Uncompromised Image Quality By a combination of Focused Phosphor Technology applied to the built-in detector and FUJIFILM’s renowned sophisticated digital image software technologies, the Image Intelligence™, the FUJIFILM DR VELOCITY Ufp offers unparalleled image quality in digital radiology. In radiographic examinations, reducing the exposure dose is an important challenge. The FUJIFILM DR VELOCITY Ufp is a high-resolution upright digital radiography system, which uses a columnar crystal X-ray detector achieving...

F U JI F I L M DR VE L O CI TY U f p S PE CIFICATIO NS Standard Components (some items are sold separately): • FUJIFILM DR VELOCITY Ufp Upright Image Reader (Model: CR-IR366) • AC Power Cord • Grid: 12:1, 10:1, 8:1 (density 36 lines/cm, focal distance 140cm or 180cm) Reading Gray Scale: 12 bits Network: 10 Base T/100 Base T Other System Components: • CR Console Plus/Lite (sold separately) • Image Recorder : DRYPIX 2000 /4000 /7000 Dimensions (W ✕ D ✕ H): • Upright Image Reader: 645 ✕ 450 ✕ 1835mm (25” ✕ 18” ✕ 72”) • Control Unit: 260 ✕ 550 ✕ 470mm (10” ✕ 22” ✕ 19”) Processing Capacity (in the...