Ambulance panel system EDITION 1/2013 The APS II is a bespoke system containing an ambulance panel, hoses and regulators ready to be mounted in an ambulance. The system is CE marked and complies with EN 1789. The APS II has three main components: regulators, hoseassemblies and panels. The modular design of the individual components means that they are infinitely variable. The individual components can then be combined in many different configurations giving the end user total flexibility.

Ambulance Regulators The APS II can be delivered with two types of ambulance regulators, Medireg and Varimed. The APS II can also be used with combivalves*. Generally Medireg is for lower capacity and Varimed for higher capacity and this capacity is determined by the equipment that is used in the ambulance. The ambulance regulators are designed to withstand the conditions in the road ambulance and are manufactured according to EN 1789. The ambulance regulators are delivered with either standard 3/8“ connections or quick connectors. The Varimed and Medireg can be delivered with electronic signal...

AMBULANCE REGULATORS DEFINITION AMBULANCE REGULATOR Type: Varimed, Medireg Inlet: acc. to national stds Outlet: G V4", QC acc. national stds Gauge: Standard, Electronic DEFINITION AMBULANCE HOSE Type: Ambulance Hose, Steelreinforced, SMART Fit AMBULANCE PANEL DEFINITION APII

Example APS II Below example shows an APS II with following components: Three AP II with one outlet, British standard, exposed One AP II with switch and gauge, exposed Two ambulance hoses, 1 meter, with 3/8 connection in one end and a British style probe in the other One hose, 25 cm, with 3/8 connections One hose, 3,7 meter, with 3/8 connections, one end not clamped One hose, 4,1 meter, with 3/8 connections, one end not clamped One hose, 7 cm, with 3/8 connections One T-pieces with 3/8 connections Two Varimed regulators Art. Nr. 735100000589. Edition 1/2013. Alterations are subject to change...