MEDICAL CENTRAL GAS SUPPLY SYSTEM EDITION 1/2013 This monitor gives visual and audible indications as well as status messages in plain language. When used with a manifold, the follows conditions are surveilled. 1. Too high or too low operating pressure, 2. Too high distribution pressure, 3. Leakage on the non-operating gas cylinder bank, 4. When change of operating side has been effected. When connected to a liquid tank the following disturbances will be reported: 1. Too high or too low operating pressure, 2. Too high or too low distribution pressure, 3. Leakage on the non operating gas cylinder bank. 4. When change of operating side has been effected. When used with a pressure watch the following conditions are surveilled: Too high or too low operating pressure. The MC7701 is able to communication wtih another equipment through a serial link RS485, Modbus RTO and/or relays. The alarm has a battery back-up for 30 minutes of operation.

GAS ALARM MC7701 TECHNICAL DATA ~ 24V, 1.3 A 10,8 V 15 W IP65 2kg 0-60 ºC 14st Modbus RTU 275×175×67 mm 310×175×67 mm Swedish, Norwegian, Danish, Finnish, English and Hungarian Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO 7396-1 (Central Gas Supply System). EMC tested in accordance EN 60601-1-2 (Emission and immunity). Transformer: Battery Pack NiMH: Power Consumption: Enclosure: Weight: Working temperature: Relay outputs: Serial communication: Dimension L×H×D : Dim. including fastening plate L×H×D: Display languages: Regulatory status: Digital pressure monitor MC7701...