Applicators Wide range for personalised procedures Nebulizers Preparation is quick and easy These are independent single-use systems The Drop-by-drop devices are designed to allow accurate applications of Glubran® 2 to take advantage of its adhesive property to replace or reinforce sutures, to cover small areas, for haemostasis or for sealing. The product must be applied in a quantity of about one drop per cm2 in order to achieve the best result. They do not connect to operating room air fittings or to CO2 cylindersdi The Dispensing tip for open surgery features a brush tip for applying a thin layer. Particularly suitable for dispensing Glubran® 2 to seal anastomoses and reinforce sutures. The outlet pressure is constant and controlled with no risk of air embolism The Flexible and rigid laparoscopic catheters are indicated for drip application of Glubran® 2 as a haemostatic, adhesive or sealant agent in laparoscopic surgical procedures. They do not require pressure regulators The inert propellant for nebulisation is non-toxic, biocompatible and has an autonomy of 8 minutes of continuous supply The nebulizers with autonomous gaseous propulsion are designed to enhance all the properties of Glubran® 2, both in laparotomic and laparoscopic surgical procedures, by forming a thin film of product. The area covered by 1 ml of Glubran® 2 is approx 15 x 15 cm = 225 cm2. 1 cm

Drop-by-drop control application device Thin film application devices Laparoscopic catheters for drop-by-drop control application PROPERTIES RATIONALE NEBULIZER DEVICE Flexible, for large surfaces, easy suitable for open surgery SMALL NEBULIZER DEVICE Flexible, for small surfaces, easy 1 cm pointing, also suitable for open surgery RIGID NEBULIZER DEVICE 4 cm Rigsd;rfac easrge REINFORCEMENT SHORT NEBULIZER DEVICE Short, for large BILIOSTASIS SHORT MINI NEBULIZER ♦ DEVICE Short, for small surfaces GLUTACK' Laparoscopic atraumatic fixing device for hernia prostheses Available in 2 sizes, 30 or 60...