Medical Gas Construction Products - 18 Pages

Add to MyMedicalExpo favorites
Medical Gas Construction Products

Catalog excerpts

CONSTRUCTION PRODUCTS

 Open the catalog to page 1

Company Overview Genstar Technologies Company, Inc.(Gentec), founded in1969, is a global industrial leader in gas flow control systems manufacturing. High quality products, competitive pricing, outstanding customer service and continuous technological innovation have fueled the company’s rapid growth. Gentec utilizes abundant global resources, skilled professionals, and robust ERP system tooperate with maximum efficiency. A wide distribution network extends to thousands of customers in over sixty countries around the world.

 Open the catalog to page 2

Medical Vacuum Packages There are many technologies available for producing vacuum for health care facilities. Each has its own unique advantages and disadvantages. Any product that contains hydrocarbons in the air stream may not be suitable for dedicated WAGD. Also, certain requirements apply for medical-surgical vacuum systems that are also used for WAGD. We recommend that you consult with your authorized GENTEC distributor for assistance in designing a system to suit your specific needs. Oil-sealed Rotary Vane Pumps Oil-sealed rotary vane vacuum pumps are the standard for the health care...

 Open the catalog to page 3

Dry Rotary Vane Pumps Dry rotary vane pumps offer the same reliable performance as their oil-lubricated brethren without the presence of oil; making these pumps compliant with the NFPA standard for dedicated WAGD vacuum sources. The composite vanes are self-lubricating. These pumps are factory warranted for 12 months from the date of start-up. Dry rotary vane vacuum pumps are available in 1, 1.5, 2, 3, 5, 7.5, and 10 HP sizes. Standard configurations include simplex, duplex, triplex, and quadruplex packages in tank mount (vertical or horizontal), base mount, or stack mounted models. Liquid...

 Open the catalog to page 4

Dry Claw Vacuum Pumps Dry claw pumps offer the advantage of high performance with low maintenance; however, they are not recommended for high altitudes due to their inability to draw a vacuum greater than 25 inHg at sea level. No oil is used in the air flow path, so claw systems can be used as a dedicated WAGD source as well as for medical/ surgical vacuum. Other Vacuum Packages GENTEC offers a full range of laboratory and dental vacuum packages as well. Contact your authorized distributor for additional information or assistance in with the planning and design of your system. Vacuum System...

 Open the catalog to page 5

Medical Air Compressors GENTEC offers a full range of oil-less reciprocating, orbital scroll, and liquid ring medical air compressor packages. All air compressor packages are complete per NFPA99, and are designed to reduce the amount of field labor required for installation. NFPA-compliant air treatment centers, in desiccant and refrigerated versions, are available as free-standing packages or integral to the air compressor packages. Please contact your GENTEC authorized distributor for assistance in designing your medical air source. Oil-less Reciprocating Medical Air Compressors Oil-less...

 Open the catalog to page 6

Orbital Scroll Medical Air Compressors Orbital scroll air compressors are essential in cases where noise and vibration are unwanted. unlike other manufacturers, our scroll packages include one motor for each compressor, so if you ever need to replace a motor, only one compressor is down. These quiet compressors are essentially vibration-free. Available in 2.0 through 15 HP sizes, these compressors can be multiplexed to meet any design requirement in a single package, with each compressor independently controlled. Very little maintenance is required, and the compressors are warranted for 12...

 Open the catalog to page 7

Medical Air Treatment Centers GENTEC medical air treatment centers are complete, NFPA-compliant packages that require minimal field labor for installation. Desiccant Air Treatment Centers Desiccant air treatment centers are available in both full-size and compact twin-tower designs. Desiccant dryers are very efficient at removing moisture from the medical air supply, and combining them with purge-saving technology reduces the amount of air used to purge, or dry, the desiccant beds. NOTE: Desiccant dryers should not be used with liquid ring medical air compressors. Refrigerated Air Treatment...

 Open the catalog to page 8

Instrument Air Compressors Instrument air is a support gas used to operate surgical tools, ceiling booms, etc., in lieu of nitrogen. All instrument air compressor packages are complete per NFPA99, and are designed to reduce the amount of field labor required for installation. Lubricated reciprocating compressors are NFPA-approved sources for the high pressure (200 PSI) air required for this support gas. As with our medical air packages, the instrument air treatment center can be assembled as an integral part of the compressor package, or can be ordered as a separate, free-standing air...

 Open the catalog to page 9

High Pressure Manifolds GENTEC offers fully automatic high-pressure mani-folds for hospital use. Fully compliant with NFPA99, these manifolds require no additional work beyond the changing of the cylinders. Liquid manifolds, as well as manifolds for highpurity and specialty gas applications, are also available. Contact your GENTEC distributor for assistance with these products. Header bars (with pigtails) are ordered separately. Header Bars & Pigtails GENTEC header bars ship complete per NFPA99, in matching sets (equal number of cylinders for each bank). Cross headers are available for...

 Open the catalog to page 10

MEDICAL GAS OUTLETS GENTEC offers a complete selection of medical gas outlets. From wall outlets to ceiling outlets, to console and EMS outlets, GENTEC can fill any need. We also offer a complete line of international outlets, including French, British, German, Australian, and Japanese standards, in addition to ISO 32 versions of the US-style outlets (Ohio, Chemetron, Puritan-Bennett, and DISS). Outlets are sold as complete kits, rough-in assemblies, and latch valve assemblies. Wall Outlets GENTEC wall outlets are designed with a inlet pigtail that swivels 360-degrees to allow the pipe to...

 Open the catalog to page 11

CONSOLE OUTLETS 90-degree & 180-degree Pigtail Inlet The 90-degree pigtail inlet assemblies allow for mounting in a vertical assembly. The pigtail rotates 360-degrees, allowing the branch piping to come in at any angle. The 180-degree pigtail inlets are designed for installation in the bottom of a fixed ceiling column, with the pigtail extending straight up for connection to the branch piping. 90-degree & 180-degree DISS Inlet DISS inlet assemblies are designed for use with hose assemblies, either in ambulances, retractable ceiling columns, or booms. Each assembly has a CGA DISS inlet,...

 Open the catalog to page 12

All Genstar Technologies Company catalogs and technical brochures

  1. FM293 SERIES

    1 Pages

  2. 880VS SERIES

    2 Pages

  3. Cutting Tips

    4 Pages

  4. Gold Series

    3 Pages

  5. Cryogenic

    8 Pages

  6. Filters

    6 Pages

  7. Tube Fittings

    32 Pages

  8. Valves

    12 Pages