Specialty Gas Equipment - 140 Pages

Add to MyMedicalExpo favorites
Specialty Gas Equipment

Catalog excerpts

Technology for a Better Future Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710, USA Tel: 909-606-2726 Fax: 909-606-6485 www.genstartech.com COPYRIGHT © 2013 GENSTAR TECHNOLOGIES CO., INC.

 Open the catalog to page 1

GENTEC® Specialty Gas Products Company Overview R13SL High Purity, Low Flow Regulator Regulator Port Components R15SL High Purity, Medium Flow Line Regulator R21SL High Purity, Low Flow Line Regulator Regulator Family R21SL High Purity, Low Flow Regulator Regulator Guide R22SL High Purity, Medium Flow Regulator Warranty Information R23SL High Purity, High Flow Line Regulator R31SL High Purity, Low Flow Regulator R42SL High Purity, High Pressure High Flow Regulator R43SL High Purity, High Pressure High Flow Regulator R44SL High Purity, High Pressure Low Flow Regulator R45SL Ultra High...

 Open the catalog to page 2

Switchover Manifolds GENTEC® Specialty Gas Products Gas Safety Cabinets Point of Use Gas Control Panels P4200 Point of Use Gas Control Panel P4400 Point of Use Gas Control Panel Manual Bank Manifolds Hydrogen Generator Nitrogen Generators BS3100 Back-up Control Panel Cylinder Connections Purge Tools and Fittings Valves, Filters and Flashback Arrestors Gauges & Electric Contact Gauges Gas Pressure Alarm & Header Bars Genstar Technologies Inc. • 909.606.2726 • www.genstartech.com Material Compatibility Allocation Table

 Open the catalog to page 3

GENTEC® Company Overview Company Overview Genstar Technologies is a global leader in Gas Flow Control Systems for the Industrial, Specialty Gas, and Medical sectors. We pride ourselves in our ability to provide customers with high quality, value added products and services that go beyond the industry standards. As a result, we have a global network of thousands of satisfied customers in over 60 countries. Our Team Our highly educated team of engineers, salespeople, technicians, managers, and customer service personnel are dedicated to providing products with the highest quality, reliability...

 Open the catalog to page 4

regulator COmponentS A GENTEC® Company Profile Regulator Port Configurations ** For R31 Series, this high pressure “Q” port configuration is plugged. This port can be used for purging purpose only. * For the “M” port configuration of R31 Series, this port is plugged and cannot be used for relief valve installation. 1. Inlet (High) Pressure Gauge • Fabricated from German imported Bourdon tubes • Fabricated from high-strength corrosion-resistant material • High accuracy and stability • Fabricated with advanced CNC machines to produce the highest 2. Inlet Connection • Multiple connections...

 Open the catalog to page 5

Gas Service and Material Compatibility Single vs. Dual Stage 1. Assess the gas application against the material of construction of the Single-Stage Regulators reduce pressure by passing through a pressure reducing valve area in one step to deliver a 2. Regulator components that come into contact with the gas stream pressure within a specific range. These regulators demonstrate called “wetted surfaces” should be compatible with the intended gas a slight increase in delivery pressure as the cylinder pressure falls during use, also known as “Inlet Pressure Decay.” This 3. CGA connections are...

 Open the catalog to page 6

regulator family Specialty Gas Regulator Family GENTEC® HIGH PURITY REGULATORS GENTEC® GENERAL PURPOSE REGULATORS GENTEC® ULTRA & HIGH PURITY CORROSION RESISTANT REGULATORS Recommended for use with inert and Recommended for use with inert, Recommended for use with semi- non-corrosive pure and mixed gas flammable, and semi-corrosive pure corrosive and some toxic applications. applications where elastomeric outgassing is not critical. These regulators are not recommended for Typical applications include GC analytical The stainless steel convoluted metal-to- analytical or high purity...

 Open the catalog to page 7

regulator guide Material Body Regulator Application General Purpose General Purpose High Purity, Medium Flow High Purity, Medium Flow High Purity, Medium Flow High Purity, Low Flow High Purity, Low Flow High Purity, Low Flow High Purity, Medium Flow High Purity, Low Flow High Purity, Low Flow High Purity, Back Pressure Sensitive, Back Pressure High Purity, Low Flow High Purity, Low Flow High Purity, Medium Flow High Purity, Low Flow High Purity, Low Flow High Purity, Medium Flow High Purity, High Flow High Purity, Low Flow High Pressure, High Flow High Pressure, High Flow High Purity, Low...

 Open the catalog to page 8

GENTEC® Warranty Information Any GENTEC® apparatus found to be defective either in Genstar Technologies Company, Inc. shall not, under any material or workmanship during the time set forth below will circumstances, be liable for any damages including but not limited to: be replaced by Genstar Technologies Company, Inc. or its indirect, incidental, consequential, or special damages, wether such Authorized Distributors, provided that said apparatus was used damages result from negligence, breach of warranty or otherwise. under normal conditions for the purpose intended. There are no other...

 Open the catalog to page 9

General Purpose Medium Flow Regulator GENTEC® G152 Series is a Single-Stage Brass Regulator designed for General Purpose laboratory applications where occasional readjustment of the working pressure is acceptable. Not recommended for high purity application in which outgassing due to elastomeric components would adversely affect the process. Product Features • 2” Neoprene Diaphragm • 2” Dual-Scale Pressure Gauges in gold steel casing • Optional outlet: Needle Valve or Diaphragm Valve G152-DKK-C320-01-NR • Conforms to CGA E-4 standard for Gas Pressure Regulators Materials • Body Forged Brass...

 Open the catalog to page 10

General Purpose Medium Flow Regulator D Inlet Pressure Range K Outlet Pressure Ranges Blank: None Other connections Genstar Technologies Inc. • 909.606.2726 • www.genstartech.com

 Open the catalog to page 11

General Purpose Medium Flow Regulator GENTEC® G152T Series is a Dual-Stage Brass Regulator designed for General Purpose laboratory applications where continuous outlet flow and pressure are desired. Not recommended for high purity application in which outgassing due to elastomeric components would adversely affect the process. Product Features • Neoprene Diaphragm: 1-1/4” for Single-Stage, 2” for Dual-Stage • 2” Dual-Scale Pressure Gauges in gold steel casing • Optional outlet: Needle Valve or Diaphragm Valve G152T-DGK-C540-01-NR • Conforms to CGA E-4 standard for Gas Pressure Regulators...

 Open the catalog to page 12

All Genstar Technologies Company catalogs and technical brochures

  1. FM293 SERIES

    1 Pages

  2. 880VS SERIES

    2 Pages

  3. Cutting Tips

    4 Pages

  4. Gold Series

    3 Pages

  5. Silver Series

    2 Pages

  6. Cryogenic

    8 Pages

  7. Filters

    6 Pages

  8. Tube Fittings

    32 Pages

  9. Valves

    12 Pages