Automated SPME-analysis Multi Fiber EXchange MFX
1 / 4Pages

Catalog excerpts

Automated SPME-analysis Multi Fiber EXchange MFX - 1

Automated SPME-analysis Multi Fiber EXchange MFX Simple and effective analyte extraction and concentration Fast and easy optimization of fiber selection Highest throughput Superior selectivity and detection limits through use of multiple phases

Open the catalog to page 1
Automated SPME-analysis Multi Fiber EXchange MFX - 2

Solid Phase Micro-Extraction SPMEAutomated SPME using the GERSTEL Multipurpose Sampler (MPS) Solid Phase Micro-Extraction (SPME) is a well established technique for extraction of organic compounds from a wide variety of matrices. SPME fibers coated with an adsorbent phase are used to extract and concentrate analytes either from the headspace above a sample or directly from the liquid sample. SPME is easily automated using the GERSTEL Multipurpose Sampler (MPS), enabling reproducible and efficient concentration of many types of analytes covering a wide polarity range. Following the...

Open the catalog to page 2
Automated SPME-analysis Multi Fiber EXchange MFX - 3

Automated SPME fiber change Multi Fiber EXchange MFX SPME is easily automated, but until now, replacing a fiber had to be performed manually, limiting the scope of automated method development and making it difficult to run large series of analyses due to limited fiber life span. The Multi Fiber Exchange (MFX) accessory for the GERSTEL MultiPurpose Sampler (MPS) enables fully automated exchange of SPME fibers within a sequence. MFX allows both analysis conditions and SPME fibers to be easily and automatically changed at any time within a method or a sequence. MFX simplifies method...

Open the catalog to page 3
Automated SPME-analysis Multi Fiber EXchange MFX - 4

GERSTEL maestro Software Next generation software for automated sample preparation and sample introduction. MAESTRO optimizes performance and throughput of GERSTEL modules and systems. Stand-Alone operation or fully Integrated In the Agilent ChemStation Software One sequence table operates the entire system including LC/MS or GC/MS Sample Prep by Mouse-Click using the PrepBuilder functions Scheduler for easy planning PrepAhead: Automated overlapping of sample prep and analysis for optimum productivity and throughput Priority samples can be added to the system at any point in the analysis...

Open the catalog to page 4

All Gerstel GmbH & Co. KG catalogs and technical brochures

  1. MPS liquid

    4 Pages

  2. MPS robotic

    16 Pages

  3. 3-MCPD

    4 Pages