MultiPurpose Sampler MPS robotic series sample prep for winners

The MPS robotic efficiently and reliably automates sample preparation and sample introduction MPS robotic for GC and GC/MS Whether you are determining VOCs or SVOCs, the MPS robotic sets the benchmark for efficiency, throughput and improved limits of detection. In the simplest possible way, the MPS robotic enables you to automate your sample preparation and improve the performance of your GC/MS analysis. More on pages 4-7. MPS robotic for LC and LC/MS For routine analysis or R&D projects: Removing unwanted matrix material; Concentrating analytes; changing the solvent; or adding standards, reagents...

The most versatile autosampler and sample preparation robot MPS robotic The MPS robotic is a highly efficient GC/MS autosampler with extended robotic functionality. The MPS robotic provides reliable and efficient processing of complex tasks. Syringes are mounted in individual syringe modules, which can be exchanged automatically within a running sequence when using the MPS roboticpro for maximum flexibility. GERSTEL Universal Syringe Module USM The GERSTEL USM is a universal syringe module for liquid syringes ranging from 1 to 1,000 μL total volume. Most application requirements can be met without...

The MPS robotic efficiently and reliably automates sample preparation and sample introduction for The GERSTEL MPS roboticpro in Liquid/HeadSpace/SPME configuration enables efficient processing of Liquid, HeadSpace and SPME Samples in one automated sequence. Liquid injection SPME and Fiber Exchange Standard, fast, sandwich, or large volume injection up to 1000 μL: The MPS performs liquid sample introduction in a highly reliable and efficient manner. Rugged and reproducible analysis - without carry-over or analyte discrimination - is at your finger tips. The MPS completely automates SPME analysis...

MPS robotic tray holder with a 40 position ALEX Liner tray (front) and two 54 position 2 mL vial trays. Automated Liner EXchance (ALEX) Solid material in samples can influence sample preparation, sample introduction and overall system stability leading to incorrect results and increasing the need for maintenance. The MPS Filtration Option enables automated filtration at any stage in the sample preparation process. In combination with the Automated Liner EXchange (ALEX) option, the MPS can automatically replace GC inlet liners for improved system uptime and ROI. ALEX provides clean chromatograms...

Thermal desorption, Thermal extraction and Pyrolysis using the MPS Thermal desorption of adsorbent tubes In combination with the GERSTEL Thermal Desorption Unit (TDU 2) or TD 3.5+, the MPS performs automated thermal desorption of up to 120 adsorbent tubes per tray holder. Applications include air monitoring, material emissions, flavors and fragrances. The MPS robotic is the most flexible automated solution available. Thermal extraction of liquids and solids In combination with the TDU, the MPS performs automated thermal extraction of liquid and solid samples in disposable µ-vials. The µ-vials...

Dynamic Headspace (DHS) DHS offers significantly improved limits of detection combined with the ruggedness and ease of use of static headspace analysis. The headspace above a solid, viscous or liquid sample is purged with inert gas and analytes transferred to, and concentrated on, a replaceable sorbent trap. The process is fully automated, including trap desorption in the GERSTEL Thermal Desorption Unit (TDU 2), or TD 3.5+ when larger adsorbent tubes are needed, and introduction to the GC/MS. DHS Large The GERSTEL DHS can be extended to accommodate sample containers up to 1 L. A single sample...

The right sample container for every application The MPS can process a variety of different sample vial types meeting almost every need. Sample trays can be heated or cooled or stored in drawers to avoid exposure to light. Several thousand samples can be stored in the smallest possible space. Micro- and deep well plates Micro- and deep well plates used in combination with stacked sample drawers enable a throughput capacity of several thousand samples per batch. Standard vials used for sample preparation and introduction The MPS can process samples in crimp cap or screw cap vials of the following...

The MPS efficiently and reliably automates sample preparation and sample introduction for LC & LC/MS analysis Thanks to its reliability, flexibility, and outsize capacity to hold and process samples, the MPS is the perfect autosampler for LC/MS analysis. Samples can be introduced from any standard size vial and from micro well or deep well plates as well. When using stacks, up to several thousand samples can be placed on the sampler under controlled conditions, cooled or heated as needed for best sample stability. Zero carry-over LC/MS sample introduction The MPS robotic LC/MS tool reduces carry-over...

Liquid Sample Preparation The MPS in combination with MAESTRO enables easy and efficient automation of all liquid handling steps for sample preparation. Among other techniques, the MPS performs: • Derivatization, addition of internal standards and weighing • Dilution and extraction • Pipetting of viscous samples • Heating, cooling and mixing • Centrifugation and sonication • Reading and processing of 1D and 2D barcodes (SID) • Filtration • Evaporative concentration (mVAP) and solvent exchange • Capping and decapping The quickMix option enables extremely fast and efficient mixing and extraction...

Maximize your possibilities Efficient sample preparation for For GC (GC/MS), LC (LC/MS) or standalone operation the MPS Dual Head version maximizes your analytical possibilities. The additional tower enables the simultaneous use of two different syringes. Sample preparation steps are performed in a controlled and highly accurate and reproducible manner for best possible results. Every step is selected by mouse-click from a pull-down menu in the GERSTEL MAESTRO software and added to the overall GC/MS or LC/MS method or sequence. MPS Dual Head configuration for sample preparation and sample introduction...