Nano-Plotter Product Overview Microarraying and Picolitre Pipetting | Non-contact picolitre pipetting for high-quality spotting, be it microarrays, biosensors, or filling of microcavities | Selection of pipette types to match the sample, not vice versa | Up to 16 independently operating piezoelectric dispensers | Many extras such as chilling, humidification, alternative dispensers, plate handler, and more The Nano-Plotter is probably one of the most flexible systems of its kind. It comes with a diverse number of pipettes (later upgrades possible) and a host of accessories to suit your needs. So first select the platform, either the small NP 2.1 or the large NP 2.1/E. Then choose the number of inkjet dispensers (1 to 16). GESIM Product Overview Select the dispenser type, with droplet volumes ranging from 50 to 400 picoliters. Add a slide deck. If you have non-standard targets, you can either order a customized one or rearrange the standard deck to one with a flat surface. Other typical extras are humidifier and chiller. Possibilities do not end here. Select from special dispensers (heatable inkjet tips, adhesive dispensers, pin tools, etc.). You can also change the number or arrangement of microtiter plates. Or use a refrigerated plate handler for thousands of samples. If you print biosensors, a microscope system for automatic image-based recognition of tiny structures is also available.

Contents Nano-Plotter Nano-Plotter – Basic Configurations NP 2.1 and NP 2.1/E for 55 and 120 slides, resp., different number of channels Work Deck Configuration Wash Stations, MTP Holders and Slide Decks “Portrait” MTP Holders and Special Slide Decks Chilling and Humidifying Automatic Source Plate Handling Dispensers and Droplet Measurement Piezoelectric Tips Flow Sensor for Droplet Measurement “Passive” Tips Alternative Dispensers (Selection) Cartridge Dispensers DELO-DOT Adhesive Dispenser Special Dispensers Optical Target Identification Optical Systems and Software 16 Fluidic System Accessories...

Product Overview Product Overview Basic Configurations of your Nano-Plotter alternative dispensers. The system price does not include a control computer. Please order a PC to ensure proper functioning. The Nano-Plotter comes in two sizes, short and long: Choose from slide decks of different size and for different targets, with extras including cooling, vacuum fixation, or spring-loaded holders. Number and arrangement of microtiter plate holders (also coolable) can be varied too; see next section. • The NP 2.1 for max. 55 slides • The NP 2.1/E for max. 120 slides A stroboscope for droplet visualization...

Product Overview Product Overview Article Number Wash Stations, MTP Holders and Slide Decks A070-016 Additional wash station NP2.1, 4 l bottles Additional wash station NP2.1, 10 l bottles Cooled microtiter plate holder MTP holder for Nano-Plotter, no cooling Cooled micro plate holder, 3-fold, for NP2.1/E, “landscape” orientation Diaphragm vacuum pump N820.3AN.18 for vacuum deck Diaphragm vacuum pump N820.AN.18 for vacuum deck Cooling chuck for small slide deck NP2.1/E (for 3 x 41 Zeptosens slides) Cooling chuck for slide deck NP 2.1 Cooling chuck for slide deck NP 2.1/E A 070-016 Nano-Plotter...

Product Overview Product Overview Article Number Cooling system for MTP (incl. recirculation bath) for NP1.2 and NP2.x, complete Ultrasonic humidifier, NP2.1(/E), complete Complete cooling system for plates and slides (incl. recirculation bath), for NP2.1 Complete cooling system for plates and slides (incl. recirculation bath), for NP2.1/E Kryo 30 (ethylenegylcol-based coolant, 5 liters) Cooling tube set for slide deck and plate holder NP2.1 Cooling tube set for slide deck and plate holder NP2.1/E Cooling tube set for 3-fold plate holder and small slide deck, NP2.1/E Cooling tube set for coolable...

Product Overview Product Overview Article Number Nano-Tip TGJ (ca. 400 pl; thin glass at the tip) Nano-Tip J, extra-long nozzle Nano-Tip HV-J, high viscosity Nano-Tip AR-J (beveled, slim design for spotting into 96-well plates) Nano-Tip R-J (beveled, slim design for spotting into 96-well plates) Pico-Tip R-J (beveled, slim design for spotting into 96-well plates) Nano-Tip HV-R-J (high viscosity, slim design for spotting into 96-well plates) Temperature control box for heatable pipette Cable for heatable pipette, NP2.1 Cable for heatable pipette, NP2.1/E Nano-Plotter fluidic system. Fluidic stage...

Product Overview A070-684 Flow sensor, four channels, with controller and base unit. Bottom: flow diagram in the Nano-Plotter software A070-687 Flow sensor, eight (2 x 4) channels, with controllers and base unit, on an eight-channel A070-900.901 Dosage capillary ("passive" tip) and adapter for disposable plastic tips The latter cannot be used together with piezoelectric tips; plastic tips are mianually loaded and ejected. Alternative Dispensers (Selection) Although emphasis is on inkjet microarray- inig, a range of other dispensers has been built into the Nano-Plotter. The first list shows piezo...

Product Overview Product Overview Optical Target Identification Biosensors and other special targets can be spotted with GESIM’s automatic image processing/identification module (A070-017). It consists of basic hardware (video microscope with holder mounted on the print head), illumination (coaxial LED light is standard, but can be replaced by other light sources), and extra software. Analogue video signals are converted to digital pictures via a converter, normally a USB device. The SpotFrontEnd software (included in A070-017) lets you graphically define complex chip layouts with one or two...

Product Overview Product Overview Nano-Plotter Spare Parts Fluidic System Accessories Use these tables to look for alternative system setups and spare parts. Replace tubing and filters on a regular basis. So put the following items on your shelf to quickly replacing worn-out or malfunctioning parts: Article Number Pumps and Syringes Article Number Pipette Head Accessories A072-005 Pipette holder (1x8) for Nano-Plotter (2.x) Pipette holder (2x8) for Nano-Plotter (2.x) System fluid pump (internal) Dilutor module XCalibur (new version) Dilutor module XP3000 (old version) Z-module without control...