Nasal Cannula - 2 Pages

Add to MyMedicalExpo favorites
Nasal Cannula

Catalog excerpts

Nasal Cannula MODELS Nasal Cannula Ø2mm L8mm - code: 12251A08 Nasal Cannula Ø2mm L10mm - code: 6968A08 Nasal Cannula Ø3mm L12mm - code: 6969A08 Nasal Cannula Ø4mm L14mm - code: 12205A08 PURPOSE As result of GINEVRI huge commitment to innovation, Nasal Cannula at Low Resistance has developed a system that is comfortable and not traumatic, thanks to its morphology and consistence, and can also be easily interchanged with a tracheal cannula in ventilation circuits, without causing additional breathing work. To ventilate the respiratory system, elastic retraction forces of the lung and the thoracic wall must be opposed, along with the resistance to flow in the airways. In the newborn, about a third of the total resistances is located at the nose level. Itis well-known that in case of breathing distress, a characteristic symptom is the movement of the nose alae. Their aim is to reduce resistances at this level, as a way of counterbalancing the increased work of breathing due to the reduction of pulmonary compliance. The degree of nasal resistances may be increased considerably with the application of Nasal Cannulas, increasing the patient's work of breathing. This may result in ipo-ventilation and apnea. This symptom is exaggerated in premature babies because of the use of smaller cannulas. GINEVRI accepted this challenge and committed-huge researches and new technologies to provide solution. The new Nasal Cannula at Low resistance has been developed to limit the high flow resistance area only to the part introduced in newborn’s nose, to aid to provide stable airway pressure. While, maintaining an insignificant resistance and dead space in the body and connection to the ventilation circuit, it reduces respiratory work. Thanks to delicate lubrication of the nasal portion and to the different sizes available, Nasal Cannula is successfully used to treat all babies, from premature to full term. GINEVRI srl – Via Cancelliera, 25/b 00041 Albano Laziale (Rome) Italy tel. +39 06 93459330 – fax +39 06 93459393 http://www.ginevri.com – E-mail: export@ginevri.com The specifications of this catalogue are indicative. The GINEVRI company could make modifications to the described equipment in any moment for technical or commercial reasons

 Open the catalog to page 1

Nasal Cannula Adapter for nasal cannula TECHNICAL DATA GENERAL CHARACTERISTICS Classification according to Directive 93/42 CEE UMDNS code Nasal Prong MATERIAL Nasalcannula Nasalcannula adapter MOPLEN (neutral, non-toxic) GINEVRI srl – Via Cancelliera, 25/b 00041 Albano Laziale (Rome) Italy tel. +39 06 93459330 – fax +39 06 93459393 http://www.ginevri.com – E-mail: export@ginevri.com The specifications of this catalogue are indicative. The GINEVRI company could make modifications to the described equipment in any moment for technical or commer

 Open the catalog to page 2

All GINEVRI srl catalogs and technical brochures

Archived catalogs

  1. Giulia

    9 Pages

  2. Lamps

    10 Pages

  3. Sophie

    4 Pages

  4. IW 909

    2 Pages