BruxZir® ADJUSTMENT & POLISHING KIT
2Pages

PROCEDURE TO STERILIZE THE ALUMINUM BUR BLOCK NAME ITEM NO. SHANK SIZE 1. ULTRASONIC CLEANING not use ultrasonic solutions containing alkali Do products such as sodium hydroxide or potassium hydroxide. a. lways mix solutions according to A instructions. b. A five-minute cycle time is recommended. c. Remove the burs from ultrasonic solution and rinse well with water. d. ry the bur block thoroughly before placing it D in a sterilization pouch. 2. STERILIZATION (Autoclave) Operate the sterilizer unit at 121°C for 30 minutes or at 132°C for 15 minutes with steam pressure of 15 psi. Allow sterilized components to dry for 15–30 minutes. Larger loads will require an additional 5–15 minutes. NAME ITEM NO. SHANK BROWN DISC BLUE DISC The BruxZir™ Adjustment & Polishing Kit equips you with the tools to modify BruxZir ® restorations and achieve the ultimate high shine and lifelike vitality. DISTRIBUTED BY: 18551 Von Karman Ave. • Irvine, CA 92612 888-303-3975 • glidewelldirect.com UM-6415_3 (3007394) Consult Instruct

BRUXZIR ADJUSTING BURS Always use light pressure with water and air spray when adjusting BruxZir ® restorations to avoid microfractures. A round bur is used for adjusting a fossa. A tapered bur is most effective for adjusting cusps or proximal contacts. BRUXZIR POLISHING CUPS Using light pressure and no water, begin pre-polishing with the green cup to remove abrasions left by the diamonds during adjustments. The green cup can also be used alone for minor adjustments if you don’t want to use a diamond. Continue pre-polishing with the brown cup until a more glossy look appears on the...