Catalog excerpts
Global D Therapeutic arsenal twinkon® 4 In-Kone®UNIVERSAL In-Kone®PRIMO 3.0 implant Implants with subcrestal shoulder The prosthesis Partner for your surgery
Open the catalog to page 1Global D therapeutic arsenal Implants with subcrestal shoulder The prosthesis Ranges of prostheses In-Kone® range of prostheses Key principles Tightening of prosthetic components Healing screws Range of components Cement-retained prosthesis Single screw-retained prosthesis Multiple screw-retained prosthesis Stabilisation of removable prosthesis Prosthesis instruments The 3.0 implant prosthetic range Indications Acti-Lock® Concept Range of components The twinkon 4 range of prosthesis Indications Key principles Range of components Global D is a French company which specialises in the design,...
Open the catalog to page 2Implants with subcrestal shoulder The prosthetic ranges corresponding to implants with subcrestal shoulders are illustrated below. The seating surfaces of the prosthetic interfaces, either friction taper or morse taper according to the product line, boost the mechanical strength of the assemblies, as well as prosthetic stability and antibacterial sealing. Correspondence between Implants and Prosthetic Ranges In-Kone® range of prostheses 3.0 implant range of prostheses 5° internal morse taper 8° internal friction taper twinkon 4 range of prostheses 5° external morse taper In-Kone® UNIVERSAL...
Open the catalog to page 3In-Kone® range of prosthesis Short abutment Direct implant hybrid cylinder Titanium base Conical abutment Angled conical abutment Hybrid cylinder for conical abutment Ball attachment Standard abutment Common prosthetic range Profiled abutment Temporary titanium abutment Tightening of prosthetic components Healing screw Key principles of the In-Kone® prosthesis Indication Single Tension-free healing screws Aesthetic concave emergence profiles Restoration Cementretained Signature of the emergence profile 1. A signature adapted to tissue profiles 2. Colour coding and laser marking on screw heads...
Open the catalog to page 4Range of components Impression copings Healing screws Direct implant impressoin coping high Periodontal Height Direct implant impression coping ‘‘High-head’’ screw ‘‘Flat-head’’ screw Screw only Height Long Pick-up without screw Pick-up without screw Long Pick-up + screw Short Pick-up + screw Impression cups NB: Cover and healing screws are for single use. They may only be screwed manually using a 1.2 mm hexagonal screw driver (hex. wrench ref. DCM1.2C / DCM1.2 / DCM1.2L). If using a torque wrench, the maximum recommended torque is 10N.cm. * Important: Manual screwing (or between 5 and 10...
Open the catalog to page 5Cement-retained prostheses 2 in 1 digital impression copings Global D digital impression copings can be used with both intraoral cameras for taking optical impressions in the mouth and flatbed scanners for digitising master models in the laboratory. They are made from anodised titanium and can generally be used without powdering. In-Kone® UNIVERSAL In-Kone® PRIMO The digital impression copings are fully universal and can be used for all our CAD/CAM solutions. The interfaces are included in the main CAD software on the market. Our libraries are available on request. The impression copings of...
Open the catalog to page 6Standard abutments Standard abutments are designed for most cement-retained prosthesis indications. Their convex collar gives the lab the option of retouching the collar in the vestibular plan. Scalloped abutments Created to meet aesthetic demands, scalloped abutments have been designed to accommodate the periodontal environment. The less-invasive concave shape naturally increases the volume of peripheral epithelial and connectives tissues to create a mucous membrane seal. Therapeutic arsenal Implants with subcrestal shoulder - The prosthesis Therapeutic arsenal Implants with subcrestal...
Open the catalog to page 7Short abutments Titanium bases Short abutments are recommended for the posterior sector, especially in cases of single or non-splinted multiple edentation. They are available in straight or angled (7 and 15°) versions and are not indexed. They are placed directly in the mouth. The anti-rotation effect is achieved by tightening the screw to 15 N.cm. A direct impression is made using the transfer cap specifically designed for this purpose, into which the abutment Analog will be placed. Its use reduces the number of manipulations performed inside the mouth. These bases can also be used by the...
Open the catalog to page 8Single screw-retained prosthesis Direct implant hybrid cylinders In-Kone® UNIVERSAL In-Kone® PRIMO These are used to make customisable abutments in both single or multi-unit cement-retained prostheses and in single screw-retained prostheses. The Castable cylinder acts as a base for making the customisable abutment (using the «cast-to» technique with chrome cobalt or pressed ceramic), which is then glued to the titanium base of the hybrid cylinder. The implant must be in the prosthesis axis when using this cylinder. Reference Titanium bases Pick-up impression coping Short/long Pick-up...
Open the catalog to page 9Multiple screw-retained prosthesis Straight conical abutments In-Kone® UNIVERSAL Straight conical abutments are indicated for screw-retained bridges, barretained removable prostheses and the «Quattro» system. The abutment can be inserted during the first prosthesis stage and impressions are then taken directly with the Pick-up or Pop-up impression copings. In-Kone® PRIMO A cover cap is available to protect the abutment while the bridge is being prepared by the prosthesis maker. If the implant is to be immediately loaded, the use of 6 mm cover caps is recommended. Angled conical abutment 0.7...
Open the catalog to page 10DTIPICVINK4.3 Pick-up impression coping + screw * Pop-up impression coping + screw * Angled conical abutments Angled conical abutments are indicated for screw-retained bridges, bar-retained removable prostheses and the «Quattro» system. These pillar abutments are available in indexed and non-indexed versions. The pillar abutment is inserted during the first prosthesis stage and impressions are then taken directly with the Pick-up or Pop-up impression copings. A cover cap is available to protect the pillar abutment while the bridge is being prepared by the prosthesis maker. DCCVINK4.3H6 High...
Open the catalog to page 11All Global D catalogs and technical brochures
-
GRAFTEK
5 Pages