SWISS optio basic regflow basic regflow Safety through Precision The basic regflow at a glance: - compact construction - continuous adjustment of the withdrawn flow-rate - available in three different flow ranges - up to two further outlets possible for the connection of consumers - mainly intended for the usage in clinics The medical pressure reducing valve basic reglow is used for the dosage of medical gases from a highpressure gas cylinder by means of an integrated flowmeter with floating body. On request the basic reglow can be equipped with one or two additinal outlets for the connection of further consumers. The two additional outlets of the basic reglow can be equipped according to the application with self-closing outlets, NIST housings or quick couplings. It must be noted that the total withdrawal amount must not exceed 55 l/min. The basic reglow is certified in accordance with EN ISO 10524-1 (incl. ignition test for oxygen). CE marking according to the Guideline for Medical Products 93/42/EEC.

Technical data : Construction pressure valve Construction flowmeter Inlet pressure Outlet pressure Flow rate ranges Measurement accuracy Gas Inlet Outlet flowmeter Additional outlets Material Sealing material Floating body Operating temperature Dimensions Weight single-stage piston pressure reducing valve flowmeter with floating body 200 bar 4,5 bar (fixed) 0 – 3 l/min, 0 – 16 l/min, 0 – 32 l/min +/- 10% or 0.5 l/min of measured value, whichever is higher Air, O2, CO2, N2O, N2 cylinder connection DIN, NF, AGA, BS, PIN-Index, UNI (others on request) external thread G1/4“, G3/8“, 9/16“UNF G1/4“...