Safety through Precision single version SWISS optio jetflow dual version The jetflow at a glance : - For exact dosage from a central gas supply - Available in three different flow ranges - Ratchet disc for simple and user-friendly setting of the extraction flow-rate - Readability of the set flow-rate from both the front and the side - Accurate withdrawal, regardless of the position of the flow control - Mainly intended for use in clinics and in emergency medicine The jetflow flow controller is used for the withdrawal of medical gas from a central gas supply. The jetflow consists of a flow controller and a country-specific probe, which is directly coupled into the terminal unit. The jetflow is available in three flow ranges; 8 different flow-rates can be chosen within each range. On request also other flow ranges are available and as a special version for air with only one flow value (5 l/min) as drive for medicinal nebulizer. As an option, the jetflow is also available in a dual-version and/or mounted on a clamping rail bracket.. The jetflow controller is certified in accordance to DIN EN ISO 15002. CE marking according to the Guideline for Medical Products 93/42/EEC.

Technical data : Supply pressure Flow rate ranges 4.5 bar (+/- 0.2 bar) (other pressure ranges on request) 1 - 15 l/min, 0.5 - 5 l/min, 0.1 - 1 l/min (other flow rates on request), special version only one flow value 5 l/min (as drive for medicinal nebulizer) Accuracy of measurement ± 20% Gas Air, O2, CO2, N2O (other gases on request) Inlet DIN, NF, CMED, AGA, BS, UNI probe (others on request) or with clamping rail bracket with NIST housing on outlet Outlet Hose connector 5 or 6 mm, threaded nipple G1/4“, G3/8“, G1/2“, 9/16“ UNF Material Brass body, external parts nickel-plated Sealing material...