video corpo

AM Aligner

AM Aligner

AM Aligner

Product catalog summary
Product and Company Identification: The document pertains to Am Aligner, a low-temperature thermoplastic splinting material produced by Chesapeake Medical Products, Inc., located in Baltimore, Maryland.
Composition/Information of Ingredients: No specific ingredients are listed.
Hazards Identification: The product poses no hazards upon skin contact, eye contact, inhalation, or ingestion.
First Aid Measures: No specific first aid measures are required.
Fire Fighting Measures: The flash point is 525°F using the Cleveland Open Cup method. For small fires, use CO2 or dry chemical extinguishers; for large fires, use foam or water spray. There are no special firefighting procedures or unusual hazards.
Accidental Release Measures: In case of spills, sweep up and collect into suitable packages, complying with regulations on reporting spills.
Handling and Storage: No special requirements are necessary.
Exposure Control/Personal Protection: No respiratory protection or protective clothing is required under normal circumstances.
Physical and Chemical Properties: The melting point is between 136°F and 140°F. The product is insoluble in water and appears opaque in beige, white, pink, or blue colors.
Stability and Reactivity: The product is stable and will not undergo hazardous polymerization. Avoid fire to prevent hazardous decomposition products like carbon monoxide.
Toxicological Information: None specified.
Ecological Information: The product poses no environmental hazards.
Disposal Considerations: Dispose of waste in an approved facility or through authorized incineration, following regulations.
Transport Information: The product is not hazardous according to Department of Transportation regulations and is not regulated by D.O.T.
Regulatory Information: None specified.
Other Information: The hazard rating is Health 1, Fire 1, Reactivity 0. The information is provided without warranty and is intended for use by technically skilled persons.
See more

Catalog excerpts

AM Aligner-1

MATERIAL SAFETY DATA SHEET Date Prepared: 10/20/15 PRODUCT AND COMPANY IDENTIFICATION CHESAPEAKE MEDICAL PRODUCTS, INC. 9629 Philadelphia Road, Suite 110 Baltimore, Maryland 21237 410-574-4171 Fax 410-574-9349 Am Aligner Low temperature thermoplastic splinting materials comprising of: Splint 1, Splint 2, Splint 3, Splint 4, Splint 6, Splint 7, Splint 0, and variations thereof, including FiberForm™ COMPOSITION/INFORMATION OF INGREDIENTS None HAZARDS IDENTIFICATION Skin Contact: Eye Contact: Inhalation: Ingestion: No hazards No hazards No hazards No hazards FIRST AID MEASURES None Specified FIRE FIGHTING MEASURES Flash Point and Method Used Flammable Limits Extinguishing Media Special Fire Fighting Procedures/Precautions Unusual Fire and Explosion Hazards ACCIDENTIAL RELEASE MEASURES Spill or Leak Procedures 525°F, Cleveland Open Cup Not determined Small fires: CO2 or dry chemical Large fires: Foam or water spray None No unusual hazards Sweep up and collect into suitable packages. Comply with State, Federal and Local regulations on reporting spills HANDLING AND STORAGE No special requirements EXPOSURE CONTROL/PERSONAL PROTECTION Respiration Protection Protective Clothing Additional Protective Measures PHYSICAL AND CHEMICAL PROPERTIES Boiling Point (°F) Melting Point (°F) Vapor Pressure (mmHG) Specific Gravity % Volatile By Volume Vapor Density Solubility in W ater Appearance and Odor N/A 136°-140° N/A 1.1@131°F-140°F N/A (air=1) N/A Insoluble Evaporation rate (butyl acetate=1) N/A Opaque, Beige(s), W hite, Pink, Blue STABILITY AND REACTIVITY Stability Hazard Polymerization Conditions and Materials to Avoid Hazardous Decomposition Products Not required under normal circumstances Not required under normal circumstances Not required under normal circumstances TOXICOLOGICAL INFORMATION None Specified Stable Will not occur Fire Thermal decomposition may give off carbon mo

 Open the catalog to page 1
AM Aligner-2

ECOLOGICAL INFORMATION Environmental Hazards DISPOSAL CONSIDERATIONS Waste Disposal In an approved waste facility or authorized incineration. Comply with State, Federal, and Local regulations on reporting spills TRANSPORT INFORMATION Dept of Transportation Classification D.O.T. Proper Shipping Name Other Regulations REGULATORY INFORMATION None Specified OTHER INFORMATION Hazard Rating Health 1; Fire 1; Reactivity 0; Least 0; Slight 1; Moderate 2; High 3; Extreme 4 To the best of our knowledge the information herein is accurate. However, Chesapeake Medical Products makes no warranty, expressed...

 Open the catalog to page 2

All Great Lakes Dental Technologies catalogs and technical brochures

  1. DentaSOAK®

    3  Pages

  2. TeleDENTAL

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.