accelerate healthcare research

nephrotron is an ultra low power, ultra compact, ultra hygienic, Android™ device based dialyzer reprocessing system. The system supports simultaneous reprocessing of two dialyzers in less than eleven minutes, both high flux and low flux dialyzers and hemodia-filters can be reprocessed. The device operates over Bluetooth (BLE) technology, it rinses, cleans and tests membrane integrity and blood compartment volume before filling your dialyzer with sterilant. The dialyzers serial number can be captured with in-built bar code scanner and reprocessing status for each dialyzer is stored automatically...

REPROCESSING DIALYZERS nephrotron is a dual station dialyzer reprocessing system, lab technician can select single station on slot one or two or select both stations to operate simultaneously. The lab technician can then provide the type of dialyzer used by specifying the TBV (total bundle volume) of the dialyzer. The fig shows the reprocessing screen, this screen shows the progress bar of the on going reprocessing, the active, pending and completed state with a check mark, displays the tank weight, chemical concentration, water and air pressure on each station. Upon completing the reprocessing...

PolyPropylene (PP) body to avoid electrical hazards. Weight : 18 Kgs R.O water Consumption -10 Litre / cycle for two units of dialyzers Max drain height -1 meter to ground level Electrical Data : Power Supply 110/230VAC, 50/60Hz, Current consumption - max 8A In-built Tablet USB charger included. External Connection : Water inlet, Chemical inlet, Drain outlet Disinfectant : Chemicals - Cold Sterilant, Citric acid, Bleach Alarm : High sound buzzer with error display for following, - High and Low water pressure - No disinfectant - High and Low chemical concentration - TBV Fail - Blood Leak test...