SPECIAL EQUIPMENT

Special equipment box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Test mandrel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reference tool holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Alignment aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Holder....

The box and its contents can be requested and ordered individually, specific for the machine type. REFERENCE TOOL HOLDER USB STICK Determination of spindle zero degree position TEST MANDREL Concentricity testing of the motorized spindle SCREWDRIVER WITH T-HANDLE HOLDER PLATE Geometry measurement Auxiliary equipment Determination of spindle zero degree position Setting of spindle position ASSEMBLY AID FOR THE SEALING RING ARTICULATED TRIPOD Geometry measurement Lip seal installation in the clamping set MAGNETIC BASE CONE WIPER Cleaning of the tool holder at the motorized spindle Identification...

Test mandrel Concentricity testing and checking of the parallelism of the motorized spindle. TECHNICAL DATA Reference tool holder Determination of spindle zero degree position. TECHNICAL DATA Determination of zero points of the main axes if a measuring socket is available. TECHNICAL DATA

Attachment of a magnetic base on the Z-axis for obtaining a flat surface. TECHNICAL DATA GROB / Weiss MSP diameter = 150 Kessler MSP diameter = 239 GROB / Weiss MSP diameter = 235 The bolt facilitates the installation of the lip seal in the clamping set of the tool holder. TECHNICAL DATA Measuring the tilting play and circumferential backlash. TECHNICAL DATA

Pull-in force measuring instrument Checking the pull-in force at the motorized spindle, manual measurement is possible. Internal storage of the measured values during automatic operation and possibility of logging with the Power Check II-PC software (USB interface). TECHNICAL DATA Base unit & SK-40 adapter Base unit & SK-50 adapter Base unit & HSK-63 adapter Base unit & HSK-80 adapter Base unit & HSK-100 adapter Checking the motorized spindle's pull-in force. In addition, the evaluation device of the pull-in force measuring instrument is needed. TECHNICAL DATA Measuring instrument Geometry measurement,...

Measuring system Basic version: The clamping force measuring system for clamping heads is used to measure the force of individual clamping heads. TECHNICAL DATA Basic version SKMB-NSM-HV 20 Basic version SKMB-SPM-HV 15 Basic version SKMB-SPM-HV 30 Basic version SKMB-NSM-HV 10 (G150) Advanced version SKM-NSM-HV 20 Advanced version SKM-SPM-HV 30 Advanced version SKM-NSM-HV 10 (G150) Control unit External activation of pneumatic movements when the safety door is open, e. g. Tool elevator, tool brush, tool gripper. TECHNICAL DATA For all G-modules without GROB mode

EUROPE NORTH AMERICA Bluffton, Ohio, USA Detroit, Michigan, USA Querétaro, Mexico Mindelheim, Germany Pianezza, Italy Birmingham, Great Britain Hengelo, Netherlands Senlis, France Baar, Switzerland Poznań, Poland Győr, Hungary Dalian, China Moscow, Russia Beijing, China Shanghai, China SOUTH AMERICA Yokohama, Japan Seoul, SOUTH KOREA Haiphong, Vietnam Hyderabad, India GROB-WERKE GmbH & Co. KG Mindelheim, GERMANY Tel.: +49 8261 996-0 E-mail: [email protected] GROB SYSTEMS, Inc. Detroit, Michigan, USA Tel.: +1 419 3589015 E-mail: [email protected] GROB SCHWEIZ AG Baar, SWITZERLAND Tel.:...