agnAlert METAL & FERROMAGNETIC DETECTOR FOR PATIENT & SYSTEM SAFETY IN THE MRI ENVIRONMENT FEATURES : TECHNICAL CHARACTERISTICS : ■ Preventive detection of metallic or ferromagnetic objects that can cause a «projectile effect» in the MRI Room (Light Signage on both sides of the terminal + audible alert) ■■ Operating Environment: - Operating temperature: -20- +60. - Storage temperature: -20- +50. ■■ Power supply: 100-220V, AC Via external CA/ CC [ACCESSORY]. ■■ Power : < 30W. ■■ Protection rating: IP55. ■■ Material type: water proof ABS. ■■ Sensitivity: adjustable 0-255. ■■ Alert time: adjustable 1-25 s. ■■ Alert tone: adjustable 1 - 10 V. ■■ Alert volume: 0-255. ■ Accurate location of objects with visual indication multi-zone and audible alert. ■ Usable in reception and preparation Areas (ZONE I, II or III) except in the MRI examination room). ■ Recording and counting of patients and alerts. ■ High and uniform sensitivity to ferromagnetics items. ■ Durable design using strong ABS material, waterproof and lightweight. ■■  Configuration of operational parameters (sensitivity, alert time, alert volume). ■■ Security: Configuration of different types of users and password-protected administrators. CONTROLS AND INDICATORS : Alert and status signal multicolored light ■ Light green Normal operation, no detection Light red Detection of ferromagnetic object above the alert limit SPECIFICITIES : ■■  Full height alarm indication followed by area indication (5 locations zones). Audible alarm ■ Alert indication for target (ferromagnetic object) above the alert limit: - Intermittent tone - A single pulse for the location of the target ■