*mymedicalexpo

Targos

Product catalog summary

Overview
This document provides technical specifications and details for cemented revision stems, specifically focusing on the Targos cemented revision stem. It includes information on various components, materials, and design features used in orthopedic implants.

Specifications

Cemented Targos Revision Stem: Available in diameters of 12 mm with lengths of 200 mm (Ref: HTT VC220) and 250 mm (Ref: HTT VC225).
Biodegradable Cement Restrictor: AIR PLUG available in sizes 8 to 16 (Refs: PLUG08 to PLUG16).
Surfical Bone Cements: Available without antibiotics in medium viscosity (Ref: FIX 1) and low viscosity (Ref: FIX 3). With gentamicine, medium viscosity (Ref: AMINOFIX 1, CCG SV001) and low viscosity (Ref: AMINOFIX 3, CCG BV003).
Femoral Heads: Stainless steel and alumina options available in various neck lengths and diameters (12/14 ø 22.2 mm and 12/14 ø 28 mm for stainless steel; 12/14 ø 28 mm and 12/14 ø 32 mm for alumina).
Epiphyseal Plate INTEGRA: Length of 250 mm (Ref: HIP VT250).

Design Features and Benefits

The Targos cemented revision stem is designed with a 130° neck-shaft angle and a 45° collar.
It features a Morse taper 12/14 with a 5°40 micro-threaded slope and an elliptic mirror-polished neck.
The stem has a polished surface and a cylindrical end, maintaining an identical shape to the cementless stem.
Common instrumentation is used for both cementless and cemented versions, allowing flexibility during surgery.

Contact Information
Contact details for various locations including Algeria, Spain, Morocco, and France are provided for further inquiries.

Catalog excerpts

Cemented revision stems

Open the catalog to page 1

Cemented revision stems Implants Cemented Targos revision stem Faithful to the concept of the Targos Group, the Targos cemented revision stem completes the range with a cemented 130° NSA stem. During surgery, the same instrumentation allows to choose between the implantation of a cemented or a cementless stem. Stainless steel femoral head 12/14 ø 22.2 mm Standard neck (0) Long neck (+3) Short neck (-3.5) Standard neck (0) Long neck (+3.5) Alumina femoral head 12/14 ø 28 mm Ref Short neck (-3.5) HAT CC428 Standard neck (0) HAT CM428 Long neck (+3.5) HAT CL428 DESIGN FEATURES AND BENEFITS Ref Short...

Open the catalog to page 2

All Groupe Lépine catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list