Exhibit with us
*mymedicalexpo  
English
  1. Catalogs
  2. Gruppo Bioimpianti
  3. K-MOD DYNAMIC CONGRUENCE

K-MOD DYNAMIC CONGRUENCE

K-MOD DYNAMIC CONGRUENCE
1 / 8 PagesView full catalog

K-MOD DYNAMIC CONGRUENCE

Product catalog summary
Introduction
K-MOD is a new total primary knee prosthesis system characterized by the modularity of its components. It is designed to minimize complications such as wear, instability, and the risk of patellar dislocation. The system offers a wide range of solutions to meet the specific needs of patients and surgeons.

Dynamic Congruence
The K-MOD Dynamic Congruence is a fixed bearing solution that restores natural knee kinematics, improving range of motion (ROM), stability, and patient quality of life. Traditional knee prostheses often replace anatomical motion with paradoxical motion, leading to instability, increased wear, and decreased flexion.

Natural Tibiofemoral Kinematics
The Dynamic Congruence insert is designed to restore natural joint anatomy and kinematics throughout the entire ROM. The medial side's spherical surface allows condyle rotation during flexion, while the lateral condyle can move posteriorly. The raised anterior lip prevents anterior subluxation.

Wear Debris Reduction
The interface between the polyethylene insert and the tibial component is mirror-polished to reduce wear. Polyethylene inserts are sterilized with ethylene oxide (ETO) to maintain long-term quality.

Trochlear Groove
The femoral component's physiological groove optimizes patellofemoral kinematics, reducing patellar dislocation risk and improving long-term outcomes.

Maximum Stabilization
The tibial component can accommodate tibial stems for additional stability, available in 21 sizes. The femoral component's dual curvature radii improve knee flexion and promote physiological rollback.

Complete Modularity
The Biolock coupling ensures complete modularity between the meniscal insert and tibial tray, allowing compatibility across different sizes.

Enhanced Implant
The tibial tray's bone-cement interface features a cavity to facilitate component implantation.

Patient-Specific Solutions
The K-MOD system uses advanced technologies for pre-operative 3D planning, ensuring precise alignment and reduced recovery time.

Uncemented and Anallergic Options
The uncemented K-MOD features a Ti-Growth-C® titanium plasma spray coating for osseointegration. The anallergic model has a titanium-niobium nitride coating to prevent allergic reactions.

Component Sizes
The system offers various sizes for femoral components, tibial stems, fixed tibial trays, DC inserts, and patellar components to accommodate different patient anatomies.
See more

Catalog excerpts

K-MOD DYNAMIC CONGRUENCE-1

KNEE-MODULAR SOLUTION DYNAMIC CONGRUENCEIPIATTO FISSO ] I FIXED BEARING ] SSSS? GRUPPO BIOIMPIANTI

 Open the catalog to page 1
K-MOD DYNAMIC CONGRUENCE-2

DC - Dynamic Congruence [ PIATTO FISSO ] [ FIXED BEARING ] KNEE-MODULAR SOLUTION K-MOD è il nuovo sistema di protesi primaria totale di ginocchio caratterizzato dalla modularità delle sue componenti. Un sistema progettato per minimizzare le complicazioni come l’usura, l’instabilità e il rischio di dislocazione patellare. Dotato di una vasta gamma di soluzioni, K-MOD si adatta perfettamente alle esigenze specifiche di ogni paziente e all’approccio del singolo chirurgo. K-MOD Dynamic Congruence è la soluzione a piatto fisso che permette di ripristinare la naturale cinematica del ginocchio migliorando...

 Open the catalog to page 2
K-MOD DYNAMIC CONGRUENCE-3

DYNAMIC CONGRUENCE DYNAMIC CONGRUENCE Naturale cinematica e stabilità del ginocchio Normal knee kinematics and stability Diminuzione dell’usura grazie al movimento femoro-tibiale guidato Minimized wear thanks to guided tibiofemoral motion Range of Motion ottimizzato Optimized Range of Motion L’Inserto Dynamic Congruence è stato progettato per ripristinare la naturale anatomia e cinematica articolare durante l’intero ROM. La superficie sferica del lato mediale consente la rotazione del condilo durante la flessione, mentre il condilo laterale può traslare posteriormente grazie all’impronta anatomica....

 Open the catalog to page 3
K-MOD DYNAMIC CONGRUENCE-4

DC - Dynamic Congruence [ PIATTO FISSO ] [ FIXED BEARING ] KNEE-MODULAR SOLUTION IMPRONTA TROCLEARE TROCHLEAR GROOVE La scanalatura fisiologica della componente femorale favorisce una corretta cinematica femoropatellare, riducendo il rischio di dislocazione patellare e migliorando i risultati a lungo termine. The physiological groove of the femoral component enables optimum patellofemoral kinematics to reduce the risk of patellar dislocation and improve long-term outcomes. Ridotte sollecitazioni del tendine patellare Reduced stress on patellar tendon RIDUZIONE DEL DEBRIS WEAR DEBRIS REDUCTION...

 Open the catalog to page 4
K-MOD DYNAMIC CONGRUENCE-5

RIACQUISTARE IL MOVIMENTO NATURALE RESTORE NATURAL MOVEMENT 4° 4° RIDUZIONE DEL NOTCHING REDUCTION OF NOTCHING L’inclinazione frontale dello scudo femorale favorisce la compressione del cemento (PMMA), facilitando l’inserimento dell’impianto e riducendo la possibilità di notching. (Fig. 1) The anterior inclination of the femoral component aids bone cement (PMMA) compression, thereby facilitating the prosthesis implant and reducing notching. (Fig. 1) CORRISPONDENZA ANATOMICA ANATOMICAL CORRESPONDENCE alla geometria ottimizzata della componente femorale. (Fig. Grazie al doppio raggio di curvatura...

 Open the catalog to page 5
K-MOD DYNAMIC CONGRUENCE-6

DC - Dynamic Congruence [ PIATTO FISSO ] [ FIXED BEARING ] KNEE-MODULAR SOLUTION IMPIANTO FACILITATO ENHANCED IMPLANT La superficie inferiore del piatto tibiale è caratterizzata da una lieve cavità, progettata per contenere il cemento osseo facilitando l’impianto della componente. The bone-cement interface under the tibial tray is provided with a small cavity designed to accommodate bone cement in order to facilitate the implant of the component. COMPLETA MODULARITÁ COMPLETE MODULARITY La completa modularità tra inserto meniscale e piatto tibiale è garantita dall‘esclusivo aggancio Biolock: qualsiasi...

 Open the catalog to page 6
K-MOD DYNAMIC CONGRUENCE-7

K-MOD NON CEMENTATA UNCEMENTED K-MOD È dotata del rivestimento in titanio al plasma spray Ti-Growth-C®. Il design bi-metal permette di mantenere le garanzie meccaniche del Cromo Cobalto e di avvalersi delle proprietà del Titanio, che stimola l’osteointegrazione grazie all’elevata porosità. This is provided with a Ti-Growth-C® titanium plasma spray coating. The bi-metal design makes it possible to maintain the cobalt-chrome mechanical guarantees and at the same time make use of the properties of titanium, which stimulates osseointegration thanks to its high porosity. K-MOD ANALLERGICA ANALLERGIC...

 Open the catalog to page 7
K-MOD DYNAMIC CONGRUENCE-8

GRUPPO BIOIMPIANTI S.r.l. 20068 Peschiera Borromeo (MI) Italy - Via Liguria, 28 Tel. +39 02.51650371 - Fax +39 02.51650393 e-mail: [email protected] www.bioimpianti.it

 Open the catalog to page 8

All Gruppo Bioimpianti catalogs and technical brochures

  1. Racoon Plate System
    Racoon Plate System

    3  Pages

  2. SMR Resection
    SMR Resection

    4  Pages

  3. DPO Plates
    DPO Plates

    6  Pages

  4. KORUS SYSTEM
    KORUS SYSTEM

    7  Pages

  5. FIN SYSTEM
    FIN SYSTEM

    12  Pages

  6. SMR 100'S
    SMR 100'S

    16  Pages

  7. SMR
    SMR

    10  Pages

  8. 2020 K-MOD
    2020 K-MOD

    16  Pages

  9. K-MOD REV
    K-MOD REV

    8  Pages

  10. VET LINE
    VET LINE

    18  Pages

  11. K-MONO
    K-MONO

    10  Pages

  12. Evo-Nail PLUS
    Evo-Nail PLUS

    28  Pages

  13. Spherus
    Spherus

    4  Pages

  14. K-MOD CRUCIATE RETAINING
    K-MOD CRUCIATE RETAINING

    8  Pages

  15. K-MOD
    K-MOD

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.