Shockwave machine

Note: This product is not a medical device and should not be used for disease treatment Product parameters Product number Product Size Shockwave energy Package dimensions Shock wave frequency Product gross weight screen size Rated voltage Warranty time Host warranty for one year; handle warranty for 3 months

Instrument Structure Display SHOCKWAVE WORKING HANDLE Power jack Switch Introduction of handle and impact head The pneumatic ballistic shock wave massager is transformed by the pulse sound waves generated by the compressor into ballistics, and the massage effect reaches the fascia layer, which can open the fascia and muscles, thereby alleviating a series of problems caused by muscle strain. Compared with the electromagnetic shock wave, the energy generated is 0.5~10BAR, and the efficiency is fast, the configuration is high, and the effect is good.

Replacing the impact head and bullet body 1. Replace the impact head: Hold the impact head with your hand, turn clockwise to tighten, and counterclockwise to loosen. Tighten clockwise Release counterclockwise impact head

2. Replacing the bullet : When the bullet body is used normally for 1 million times, first use a small iron bar to push out the original bullet body,Put the new bullet into the steel pipe, and then tighten it to the back end of the handle. If the bullet is not in the steel pipe, it may be sucked into the handleThe rear end (as shown in Figure 1) can be poured out by force. Note: Please use a brush or soft cloth to clean the steel pipe before replacing the bullet . 3. After the handle has been used for a period of time, check whether all the sealing rings and rubber particles (picture 1) are damaged,...

Product display from various angles Attachment list 3、Impact head (9 working heads) 4、Handle bracket 5、Power cable Four (including 1 in the handle)