*mymedicalexpo

LT Crown UV

Product catalog summary

Product Identification: This document is about Saremco Dental AG's product, saremco print CROWNTEC, a 3D printable resin-based material for dental corrections or reconstructions.

Supplier Details: Saremco Dental AG is located at Gewerbestrasse 4, CH-9445 Rebstein. Contact can be made via email at [email protected] or phone at +41 71 775 80 90.

Hazards Identification: Classified under the GB CLP Regulation, the product can cause skin and eye irritation, allergic skin reactions, and respiratory irritation. Key hazardous components include Bisphenol A Polyethylene Glycol Diether Dimethacrylate and Methyl benzoylformate.

First Aid Measures: For inhalation, provide fresh air. For skin contact, wash with water and soap. Rinse eyes with water and consult an ophthalmologist if needed. If ingested, rinse mouth and drink water.

Firefighting Measures: The product is non-flammable. Firefighters should use self-contained breathing apparatus and chemical protective clothing.

Accidental Release Measures: Avoid inhalation and contact with skin and eyes. Use personal protective equipment and prevent entry into water systems.

Handling and Storage: Ensure proper ventilation and avoid dust formation. Store in a tightly closed container in a well-ventilated area accessible only to authorized personnel.

Exposure Controls/Personal Protection: Use local exhaust ventilation and personal protective equipment, including gloves and goggles. Respiratory protection is advised if ventilation is inadequate.

Physical and Chemical Properties: The product is a viscous, white substance with a boiling point over 150°C and a flash point of 110°C. It is insoluble in water.

Stability and Reactivity: The product is stable under recommended storage conditions but sensitive to light.

Toxicological Information: The product may cause skin and eye irritation and allergic reactions. It is not classified as carcinogenic or mutagenic.

Ecological Information: The product has not been tested for environmental impact but is not expected to be hazardous to water.

Disposal Considerations: Dispose of in accordance with local regulations, avoiding release into water systems.

Transport Information: The product is not classified as dangerous for transport under ADR, IMDG, or IATA regulations.

Regulatory Information: The product is not subject to SEVESO III regulations and does not meet PBT/vPvB criteria.

Other Information: Abbreviations used include ADR, IMDG, IATA, GHS, and REACH, among others.

Classification and Evaluation Method:

Skin Irritation (Category 2) - Causes skin irritation (H315) using the calculation method.
Eye Irritation (Category 2) - Causes serious eye irritation (H319) using the calculation method.
Skin Sensitization (Category 1) - May cause an allergic skin reaction (H317) using the calculation method.
Specific Target Organ Toxicity - Single Exposure (Category 3) - May cause respiratory irritation (H335) using the calculation method.
Suspected of damaging fertility (H361f).

Relevant Hazard Statements:

H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
H361f: Suspected of damaging fertility.

Additional Information: The information provided is based on current knowledge and does not guarantee product properties or establish legal rights. The recipient is responsible for compliance with existing laws and regulations. Data for hazardous ingredients were sourced from the latest version of the sub-contractor's safety data sheet.

Catalog excerpts

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier saremco print CROWNTEC 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture 3D printable resin-based materials for the correction or reconstruction of functionally compromised natural dentition. Uses advised against None. 1.3. Details of the supplier of the safety data sheet Company name: Saremco Dental AG Street: Gewerbestrasse 4 Place: CH-9445 Rebstein Telephone: e-mail: Contact person: e-mail: Internet: Responsible Department: +41 71 775 80 90 [email protected] Dr. Christoph Evers [email protected] www.saremco.ch Vigilance 1.4. Emergency telephone number: SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GB CLP Regulation Skin Irrit. 2; H315 Eye Irrit. 2; H319 Skin Sens. 1; H317 STOT SE 3; H335 Full text of hazard statements: see SECTION 16. 2.2. Label elements GB CLP Regulation Hazard components for labelling BISPHENOL A POLYETHYLENE GLYCOL DIETHER DIMETHACRYLATE, BisEMA Methyl benzoylformate Signal word: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation.

Open the catalog to page 1

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 Precautionary statements P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash mit Wasser und Seife thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P302+P352 IF ON SKIN: Wash with plenty of water. P321 Specific treatment (see hinten on this label). P333+P313 If skin irritation or...

Open the catalog to page 2

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 SECTION 4: First aid measures 4.1. Description of first aid measures After inhalation Provide fresh air. When in doubt or if symptoms are observed, get medical advice. After contact with skin After contact with skin, wash immediately with plenty of water and soap. Take off immediately all contaminated clothing and wash it before reuse. Medical treatment necessary. After contact with eyes After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult...

Open the catalog to page 3

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 7.1. Precautions for safe handling Advice on safe handling If handled uncovered, arrangements with local exhaust ventilation have to be used. Avoid dust formation. Do not breathe dust. Advice on protection against fire and explosion No special fire protection measures are necessary. Advice on general occupational hygiene Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and face before breaks and after work and take a shower if necessary....

Open the catalog to page 4

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 Colour: Melting point/freezing point: Boiling point or initial boiling point and boiling range: Flammability: Lower explosion limits: Upper explosion limits: Flash point: Auto-ignition temperature: Decomposition temperature: pH-Value: Water solubility: white not determined > 150 °C not determined not determined not determined 110 °C not determined not determined not determined The study does not need to be conducted because the substance is known to be insoluble in water. Solubility in other solvents...

Open the catalog to page 5

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 CAS No Chemical name Exposure route Irritation and corrosivity Causes skin irritation. Causes serious eye irritation. Sensitising effects May cause an allergic skin reaction. (BISPHENOL A POLYETHYLENE GLYCOL DIETHER DIMETHACRYLATE, BisEMA; Methyl benzoylformate) Carcinogenic/mutagenic/toxic effects for reproduction Based on available data, the classification criteria are not met. STOT-single exposure May cause respiratory irritation. (BISPHENOL A POLYETHYLENE GLYCOL DIETHER DIMETHACRYLATE, BisEMA)...

Open the catalog to page 6

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 Disposal recommendations Do not allow to enter into surface water or drains. Dispose of waste according to applicable legislation. Contaminated packaging Wash with plenty of water. Completely emptied packages can be recycled. SECTION 14: Transport information Land transport (ADR/RID) 14.1. UN number or ID number: 14.2. UN proper shipping name: 14.3. Transport hazard class(es): 14.4. Packing group: No dangerous good in sense of this transport regulation. No dangerous good in sense of this transport...

Open the catalog to page 7

Safety Data Sheet according to UK REACH Regulation saremco print CROWNTEC Revision date: 09.05.2023 GHS: Globally Harmonised System of Classification, Labelling and Packaging of Chemicals UN: United Nations DNEL: Derived No Effect Level DMEL: Derived Minimal Effect Level PNEC: Predicted No Effect Concentration ATE: Acute toxicity estimate LL50: Lethal loading, 50% EL50: Effect loading, 50% EC50: Effective Concentration 50% ErC50: Effective Concentration 50%, growth rate NOEC: No Observed Effect Concentration BCF: Bio-concentration factor PBT: persistent, bioaccumulative, toxic vPvB: very persistent,...

Open the catalog to page 8

All GuangzhouHeyGears Technology Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list