Compatibility of Hadeco's Probes with STERRAD® Sterilization

This document provides a compatibility matrix for various Hadeco probe models with the STERRAD® sterilization system by Johnson & Johnson, specifically models 50, 100S, 200 NX, and 100NX.

Probe Models and Types

• Standard Duo Express Flex Probes: ACP-08, CRP-10H, CRP-20H, CRP-20H1N, FDP-08, FDP-10
• Bayonet Probes for DVM-4300: HP10M2N5A, HP10M2N5AF, HP20M1N5AF, LRP-08, LRP-10, NDP-10H, NDP-20H
• Bayonet Probes for DVM-4500: NP20M1N8A, NP10M2S8AF, NP20M12S8AF, NRP-10H, NRP-10HF, NRP-20H, NRP-20HF, NRP-20H1NF, P4M05N5A, P5M05N5A, P8M05N5A, P10M5N5A, PP8M05N5A, PP10M5N5A
• TCD for DVM-4300: PW2M15N5A
• Super Flat for DVM-4300: SP10M2N5A, TK10M3S8AF, TK10M4S8AF, TK10M5S8AF, VRP-08, VRP-10, VRP-20

Sterilization Compatibility Summary

Each probe model is evaluated for compatibility with the STERRAD® sterilization process. The matrix uses symbols to indicate compatibility:

• ○ (Circle): Compatible
• × (Cross): Not Compatible

For all listed probe models, the first five columns (presumably representing different STERRAD® sterilization cycles or parameters) show compatibility (○), while the last three columns indicate non-compatibility (×). This suggests that these probes are compatible with certain STERRAD® sterilization cycles but not others.

Additional Notes

• The probes are categorized by their intended use, such as neurosurgery (reusable and disposable), pencil type for DVM-4300, tucking for DVM-4500, and various shapes (curved, flat, small monitoring, long, flexible).
• The manufacturer is Johnson & Johnson, and the sterilization methods referenced are specific STERRAD® models.

Critical Information

• Users must verify the specific STERRAD® sterilization cycle used to ensure compatibility with the probe model.
• Not all sterilization cycles are suitable for all probes; improper sterilization may damage the probe or compromise sterility.
• Consult this compatibility matrix before sterilizing Hadeco probes with STERRAD® systems.