A new platform for pre-storage pooling and testing of Whole Blood-Derived Platelets (WBDP) platelet Pool & Store systems Acrodose PLus System The Acrodose PL System is a closed system for the pre-storage pooling and storage of leukoreduced WBDP. The Acrodose PLus System is a closed system for the pre-storage pooling, filtration and storage of non-leukoreduced WBDP. Indication Pooling, filtration (Acrodose PLus System only), bacteria testing* and storage of platelets. Blood Components Produced Acrodose Platelets – ‘Transfusion-ready’, pooled, leukoreduced, ABO matched and bacteria tested platelets. * ome system configurations are available with an integrated S culture-based platelet bacteria detection system. Performance AN ACRODOSE PLATELET—Addressing the Challenges of Platelet Supply, Safety and Cost With Acrodose PL Systems, a new generation platelet product, an Acrodose Platelet, is produced meeting all these challenges. This innovative product is designed to be clinically equivalent to single donor platelet (SDP) enabling blood collection facilities to tap into the abundant but often discarded resource of whole blood-derived platelets. In comparing whole blood-derived platelets to single donor platelets, consider: Platelet Quality In vitro and in vivo studies suggest that pooled, stored, ABO matched platelets are comparable in quality to single donor platelets.1 Platelet Dosing Acrodose Platelets can easily be targeted to consistently meet single donor platelet counts (at least 3.0 x 1011 platelets in a dose). Bacteria Detection Using culture-based bacteria detection systems to test single donor platelets has become the standard level of care. Because this same method of bacteria detection is applied in the process for Acrodose Platelets, these two products may be considered comparable. Donor Exposure Although the concern over donor exposure to viruses during pre-storage pooling is real, the advent of nucleic acid testing (NAT) has significantly reduced this r

PLATELET POOL & STORE SYSTEMS Conditions of Use Shelf Life: ■ 2 years in unopened package. ■ the set can be removed from its packaging stored up to the expiration of the product with no compromise of product integrity. For systems with an integrated e BDStm Set (Reorder codes: 732-80 & 732-82), the contents of the unit pack must be used within 14 days of opening. Storage Conditions: Room temperature; avoid excessive heat; protect from freezing. Single Use. Pooling and/or Filtration of Platelets Latex Content: this product is free of natural rubber latex. Platelets for Pooling: 3-6 ABo identical...