Catalogs >
HaHasmile >
Sintering Retainer Glue 10ml

Sintering Retainer Glue 10ml
1 / 1Pages

Catalog excerpts

HaHasmile Sintering Retainer Glue Function: In the glazing and porcelain operation, it is used to fix the support and avoid the contact between the support nail and the restoration. Specification:10ml/ piece (for reference, it can bond 250 units) Character: Translucent paste shape, non-toxic and tasteles Deionized water [Usage] 1. Crown bridge: unscrew the sealing cover, gently push the needle tube piston handle, push the soan-size quantity onto the sintered fixation pin, or directly inject the prosthesis into the crown, and then place the prosthesis on the sintered nail. 2. Veneer, inlay and high inlay: unscrew the sealing cover, gently push the needle tube piston handle, push the soy-sized quantity to the bottom of the repair body, and then place the repair body directly on the sintering plate. [Notes] 1. After use, make sure to screw the lid tightly and keep it sealed against light and room temperature. 2. each time the amount of use should not be too much, only need the size of soybean can be. 3. After sintering, the sintered paste appears as a white mass, and there may be a little bond to the repair body. It can be cleaned in time with shock cleaning agent. 4. The filling amount of the sintered paste in the body of the repair should be appropriate to prevent the contact between the sintered paste and the external dyeing paste on the edge of the repair body from damaging the external dyeing effect. [Storage] It is placed in a clean and dry room to avoid severe extrusion and vibration during storage and handling, as well as collision with hard objects.

Open the catalog to page 1

Sintering Retainer Glue 10ml 1 / 1Pages

Catalog excerpts

All HaHasmile catalogs and technical brochures

Sintering Retainer Glue 10ml
1 / 1Pages