Catalogs >
Hamilton Process Analytics >
VisiFerm mA 120 H3

VisiFerm mA 120 H3
1 / 2Pages

Catalog excerpts

VisiFerm mA 120 H3 Specification Sheet (Part/REF # 10070760-1111) VisiFerm mA features a 2-wire design, HART communication, wireless communication via Bluetooth, and additional robustness for GMP production and explosive environments. Product Specifications Sensor Family Electrical Connector Measurement Principle Oxygen dependent luminescence quenching, temperature compensation Measuring Range Drift at Room Temperature Oxygen Consumption Temperature Sensor Configurable Values DO: mbar; %-sat; %-vol; µg/l; mg/l; ppb/ppm (gas); ppb/ppm (dissolved oxygen); Temperature: °C Process Connection Wetted Parts Stainless Steel 1.4435 EPDM (Ethylene propylene elastomer) VMQ (Silicone elastomer) See compliance details in Material Specification document Surface Quality of Steel Two wire sink 4 to 20 mA for DO, programmable Transmitting Power Digital Interface Bluetooth 5.0 HART Version 7.0 Operating Voltage Serial Number Response Time Yes, with measured current in air ATEX Approval IECEx Approval

Open the catalog to page 1

Steam Sterilizable Yes, max. Temperature 140 °C Operating Temperature Range -20 to 140 °C; the sensor provides no DO reading above 85 °C Required Flow None Specifications are subject to change without notice Spec. Version E

Open the catalog to page 2

VisiFerm mA 120 H3 1 / 2Pages

Catalog excerpts

All Hamilton Process Analytics catalogs and technical brochures

VisiFerm mA 120 H3
1 / 2Pages