Catalogs >
Hammerlit >
Shuttle System:

Shuttle System:
5Pages

Catalog excerpts

Shuttle System: Function Docking of Shuttle Cart With a 2-point linking mechanism the shuttle cart is easily and safely connected to the shuttle transport cart (patent: DBP DE 17 290). ... until it hits the arrester ... ... and shift towards the transport cart. It snaps into place automatically. Approach the cart in angular way ... Unlinking the Shuttle Cart For unlinking simply use the locking bar at the handle and swivel the shuttle cart away. Case Carts Passing Over the Shuttle Rack After docking, the shuttle can be pushed in (without changing the position): Simply lift the locking bar ... ... until it snaps into place. ... and push ... Removing the Shuttle To get the shuttle rack out of the cart, the steps have to be performed in reverse order. Simply lift the locking bar again and pull the shuttle rack out until it snaps into place on the shuttle cart automatically. 98

Open the catalog to page 1

Shuttle System: Transport Carts RGEE, STAINLESS STEEL Elements Accomodating Shuttle Rack - silent and stable elements to guide 1 or 2 shuttle racks - dolly and shuttle rack snap into place automatically inside the transport cart Technical features: see page 95 Casters: - 2 fixed and 2 swivel casters with double brake - Ø 160 mm, with precision ball bearing with dustguard - easy roll casters with solid elastic rubber profile - caster housing: zinc-chromated Alternative casters: see page 95 Dimensions (mm) Model # Width Depth Height Matching shuttle rack Matching dollies/ platforms Case Carts...

Open the catalog to page 2

Shuttle System: Shuttle Racks, STAINLESS STEEL Shuttle Racks - Material 1.4301/ AISI 304 stainless steel - 25 x 25 mm square-profile tube construction, seamless welded - Locking bar dimensions in full width of rack, which allows front and side access for handling - 4 fixed casters, ø 75 mm, heat-resistant profile - autoclavable Dimensions (mm) Width Depth Height 9 x 1 STE EGSTE9E60 with 9 pair of slides CES60 Case Carts Shuttle Rack with U-Slides, height adjustable (CESU60) for ISO trays 400 x 600 mm or with height adjustable slides CES60 for ISO boxes 400 x 600 mm - with 6 resp. 12 pairs...

Open the catalog to page 3

Shuttle System: Dollies, STAINLESS STEEL UEW Series - Welded stainless steel body, 1.4301/AISI 304 - With guidance and docking mechanism to accommodate one or two shuttle racks - The dolly is fitted with a two-point docking mechanism compatible with corresponding transport cart RGEE SH or platform PF STE - Dolly can be easily uncoupled from transport cart using the ergonomically designed release mechanism built into the push handle - Solid plastic bumpers on three sides - 4 swivel casters, 2 with double brakes, conductive solid rubber profile, Ø 125 mm, with precision ball bearing -...

Open the catalog to page 4

Shuttle System: Platforms, STAINLESS STEEL Platforms - Welded stainless steel body, 1.4301/AISI 304 - With a guidance and anchoring mechanism to accommodate one or two shuttle racks - With docking mechanism for linking to corresponding dolly - Front and rear bumpers - Four conductive height-adjustable feet Matching Shuttle Rack Dimensions (mm) Width Depth Height *** Construction height depends on caster Ø of the transport cart Shuttle System: Transfer Barrier CLEAN – UNCLEAN Case Carts - Stainless Steel 1.4301 - for spatial separation of clean and unclean sections Transfer Barrier Pass over...

Open the catalog to page 5

Shuttle System: 5Pages

Catalog excerpts

All Hammerlit catalogs and technical brochures

Shuttle System:
5Pages