Dental Equipment & Supply
1 / 44Pages

DENTAL LAB EQUIPMENT FAMILY OWNED & OPERATED SINCE 1920 • All 18 gauge welded steel construction with an oven-cured powder-coated painted finish • Spacious 6” riser or chase to run air, gas and electric lines • Totally enclosed, powerful and quiet 62-II Dust Collector pre-wired for ease of operation • Double tier shelf to hold cases conveniently • Dual fluorescent bulb overhead lighting mounted on stylish and strong support with the pre-wired light switch • Six outlet pre-wired power strip • Removable 16” x 12” stainless steel work surface protector • Laboratory grade solid, smooth Resistop© work surface that resists stain and scratches • Two suction inlet options • Bench top 3” suction inlet with blast gate • In drawer suction complete with protective acrylic shield and padded comfort arm rest • Four drawers for storing tools and equipment • Easy set-up and assembly • Dimensions: 42”W x 30”D x 32” H work surface DENTAL LAB EQUIPMENT FAMILY OWNED & OPERATED SINCE 1920 612 North Ave East, Westfield, NJ 07090 Tel (908) 233-7796 Fax (908) 233-7340 Dental Equipment & Supply 612 North Ave East, Westfield, NJ 07090 Tel (908) 233-7796 Fax (908) 233-7340

HANDLER YESTERDAY, TODAY AND TOMORROW It was the early 1900’s and the German emigrant owner of a small dental lab in Kearney, New Jersey was making vulcanite dentures and partials. Edward Handler knew there must be a better way to make removable dental appliances. He designed and had cast new styles of denture flasks that were easier to take apart and remove models. He designed a newer style and less expensive flask press. Both the “Donham Flask” and “Ideal Press” were a hit in the local dental lab market, so Ed decided to open a dental manufacturing facility at his location in Kearney. Ed...

Product Guide Turn to back of this catalog for a full line of Lab Furniture or visit us on the web at: handlermfg.com DENTAL TRADE ALLIANCE United States of America 612 North Avenue East, Westfield, NJ 07090-0520 Ph: 908-233-7796 Fx: 908-233-7340 www.handlermfg.com Copyright © 2012-13 HANDLER MANUFACTURING, INC. All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice. All rights reserved. CATALOGUE 2012-2013

Lathes & Motors Red Wing Polishing Motors have been manufactured by Handler for over 90 years. While providing a variety of horsepower ratings and speeds for the technician, Red Wing motors are made in the U.S.A., ETL listed, and known the world over for quality, dependability and affordability. Precision turned shafts made of alloy steel and double shielded ball bearings insure the smooth movement of shafts. Since 1920, Red Wing motors have provided the precision and torque required by the dental and industrial trades. We are certain you will find Handler Red Wing motors the most durable...

16B CHUK/CHANGER WITH LATHE Model 16B is the Chuk/Changer factory-installed to the right side of a 26A Low Base, Red Wing Lathe.This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds.The movement of the activating handle allows the technician to change from 1/4” [6.4mm] to 3/32” [2.4mm] burs, mandrels and chuck accessories without stopping the lathe.This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance...

MODEL TRIMMERS Model Trimmers - Wet and Dry Handler Model Trimmers are known the world over for quality, durability and affordability. Built of water grade aluminum, bronze and stainless steel, Handler Model Trimmers are offered in two different wheel sizes - 10” and 12”. All units are powered by industrially rated, ball bearing, capacitor start motors.This non-stalling feature, along with easy access to cleaning and quick wheel change, provide a superior trimmer for your laboratory. All model trimmers are made in the U.S.A., ETL Listed and come complete for easy installation and operation....

A 12” [30cm] diameter Trimmer designed for the laboratory technician who trims plaster and stone models on a daily basis. Powered by a FULL 1/2 HP ball bearing, capacitor start motor, the 32 features a larger frontal opening and additional grinding capacity to trim models faster and easier. The swing-open front housing with full wheel radius water spray, internal gutter for water diversion, surrounding drip trough, and motor cover with utility tray, makes this trimmer an excellent addition to the working laboratory. Shipped complete, ready to use with minor set-up; finished with a durable,...

DUST COLLECTION DYNA-VAC Systems For over 90 years, Handler has built durable, functional and affordable dust collectors. Our experience with dust collectors is second to none in the dental trade.We are certain you will find a Handler dust collector to fit your requirements. Should you require assistance in designing a suction system for your laboratory contact Handler. Our design staff will provide you with layout assistance. For those cases when a central system is not indicated, we offer a variety of units for the benchtop and underbench positioning. Some different types of dust require...

Designed to provide excellent suction to a single bench top work position, the 62-II Super Sucker develops 110 CFM ( cubic feet / minute) at a static pressure of 63” of H20 and is one of the most powerful single station dust collectors available. Designed for continuous duty, the double walled disposable filter bag is easily removed through the front access door with the removal of two thumb screws. A rear internal activated charcoal filter aids in the removal of acrylic monomer odors. The 62-II Super Sucker is shipped complete with the dust collector with variable speed controlled suction...