OFFICE INFORMATION 2 NORTH AVENUE EAST QUALITY BUILT FUR OVER 85 YEARS

NOTES 700 SANI-GRINDER Handler’s 700 Sani-Grinder is built for shaping, grinding and polishing orthotic appliances. Low speed allows for shaping and reduction of plastics, foams and leather, while the high speed provides polishing and faster reduction of orthotic appliances, podiatric and other materials. The integral rear suction filter bag is easily removed and emptied with the aid of an encased zipper. Contact your distributor or Handler Manufacturing for additional information and data on Handler’s Model 700 Sani-Grinder. Rear View PODIATRY: 1-800-247-2635 | www.handlermfg.com 12 PODIATRY:...

The 700DT Double sided Sani-Grinder is designed with two 3" X 3" sanding sleeves - one each mounted on the Left and Right side of the unit. Built for the laboratory which produces custom orthotic appliances, the 700DT is fitted with a coarse and fine 3" x 3" abrasive wheel for fast or slower reduction of various materials. Two speeds allow for easy shaping and polishing of ortho application. A separate dust collector sleeve shields to collect dusts and grinding debris from both sides of the FINISHING ACCESSORIES BUFFS: Muslin Buffs used to finish polish plastics and metals. finishing plastic,...

SHANK HIGH SPEED & CARBIDE BUR High speed burs - below is a listing of the most popular high speed steel burs. Manufactured of high speed alloy steel. These burs are less expensive and provide good cutting efficiency for soft materials. Straight - Taper Straight Straight - Fissure Wheel - SM Wheel MOUNTED ABRASIVE POINTS Carbide steel burs are manufactured in various configuration Carbide steel is much harder than high speed steel - designed to last 4-5 times longer and cut smoother. Tear Drop RQUE Handpiece □yno/Torque Handpiece: An electric Micro-Motor Hand piece designed to help reduce and...

500-3 Syncro/Torque: A superior electronic Micro-Motor Hand piece for use in the laboratory or examining room. The 0-35,000 RPM Micro-Motor has superior torque which may be utilized for reducing and creating special custom made podiatric appliances. The 500-3 is shipped complete with an accelerator style foot switch which may be attached to the side of a lab bench and activated with the slight push of your knee or by foot control. The 3/32" diameter collet quickly interchanges mounted burs and abrasive wheels with the twist of the Hand piece collet collar when the unit is stopped. The 500-3 may...

SANI-VAC REPLACEMENT PARTS Disposable filter Bags for Sani-Vac. (Specify model and color of unit) Polyester Filter for Sani-Vac. (Specify model and color of unit) When ordering parts for your Sani-Vac, please specify serial number, age and color HEPA Filter for current Flexible/Rigid Stainless Steel Specify age, color and serial number of Sani-Vac when An industrial Sani- Grinder/ Polishing unit built for the large orthotic laboratory which creates various appliances on a daily basis. suction motor which produces minute) suction power to collect dusts, debris and polishing compounds. Twenty four...

collect dusts and debris from the abrasive removal dusts of orthotic appliances and nail dusts. Two wheels and a retractable cordset allow the Sani-Vac to move easily through- out an examining room, to other rooms A variable speed control allows the user ,to select the vacuum required to collect ■orthotic and nail dusts. A stainless steel flexible/rigid collecting duct is fitted with a small collection funnel to allow dusts and debris to be channeled into the Sani-Vac's disposable filter bag for future removal. The removable filter bag collects disposable debris, while the fine polyester and...