LAB FURNITURE
15Pages

Handler Manufacturing, Inc. www.handlermfg.com Modular, Flexible Design and Easy Assembly Warm Gray, Colonial White, Designer Beige, Eagle White, Blue Heaven, Charcoal, Merlot Custom Benches and Cabinets Built to Your Specifications. Call us for a free consultation. 612 North Avenue E., Westfield N.J. 07090 Tel (908) 233-7796 Fax (908) 233-7340

All Benches and Cabinets Available in: 2-Technician Corner Work Station SMALL FULL SERVICE LAB Benches Specially Designed for Dental Lab Operations WALL STORAGE Venting PLASTER BIN WORK STATION POLISHING PLASTER AREA CASTING AREA

Modular Cabinets for Flexible Design & Ease of Assembly

GROUP PRACTICE Customized Solutions Custom Benches and Cabinets Built to Your Specifications Stainless Steel Tops with Raised Edge to Prevent Water Runoff Special Shelving for Storage or Holding Burnout Ovens Slide Out Trays Installed for Cabinet Curing Units or Other Needs PTL-215SP BENCH 4-TECHNICIAN DENTURE WORK BENCH

MULTI-STATION TECH RITE Durable, Rugged Resistop© Countertops All Benches and Cabinets Available in: CORNER WORK STATION

COMMERCIAL - HOSPITALS, GOVERNMENT AND EDUCATION

The PTL-215SP is engineered to provide affordable and durable functionality with style and performance. As the newest addition to Handler’s Pro Tech Lite bench line, the PTL-215SP is the most comprehensive work station there is. Standard with the PTL-215SP is a full 24” deep work surface free of obstacles for maximum work area and the list of standard components is long. • All 18 gauge welded steel construction with an oven-cured powder-coated painted finish • Spacious 6” riser or chase to run air, gas and electric lines • Totally enclosed, powerful and quiet 62-II Dust Collector pre-wired...

LABORATORY WORK BENCHES Handler’s work stations and cabinets are built of heavy gauge sheet steel and powder coated for longevity and durability. Five drawer technician’s bench with resistop. Resistop is similar to man made slate. Built of heavy gauge sheet steel with heavy gauge tubular steel legs, the 211 is shipped complete with four legs with leg levelers, duplex electrical outlet, suction inlet and knock-outs for air and gas valves. This bench has an oven-cured, powder-coated finish and Resistop© Countertops. *NOTE: Gas and air valves as shown are at additional charge. Shipping Wgt.:...

A two technician pedestal bench containing five drawers for each technician. Benches are mounted face to face supported by pedestal. Bench also includes a 60U dust collector for two technicians, two fishmouths, flexible ducting, clamps, blastgates and two lighted remote switches mounted on vertical risers. Supplied with Resistop© tops, and an oven-cured, powder-coated finish. *NOTE: Gas and air valves as shown are at additional charge. Shipping Wgt.: 450 lbs. [204.1 Kg] Unit Dimensions: 42” W x 49” D x 32” to work surface [107cm x 125cm x 81cm] Riser is 42”W x 13” D x 6” H [107cm x 33cm x...

A seven foot bench built for use as a plaster bench. Bench contains one 35” [89cm] double door cabinet, one 24” [61cm] single door cabinet and one 24” [61cm] four drawer cabinet combined. Built-in 16” x 12” x 8” deep Resistop© sink with chrome plated mixing faucet, and adjacent plaster (waste) chute. Bench constructed of heavy gauge sheet steel with an oven-cured, powder-coated finish with Resistop© Countertop and backsplash. Shipping Wgt.: 475 lbs. [215.4 kg] Dimensions: 83 3/8” W x 24 1/2” D x 36 3/4” H to work surface [213cm x 62cm x 109cm] Available with 6” riser at additional cost....

CABINETS & BENCHES 241 Double Door Cabinet A 35” [90cm] wide double door cabinet built of heavy gauge sheet steel and covered with Resistop work surface. Full size doors provide complete access to enclosed area.Cabinets and doors finished in an oven-cured, powder-coated finish. Shipped with 6” Backsplash, may be ordered with 6” Riser option at additional cost. Shipping Wgt.: 185 lbs. [83.9 kg] Dimensions: 35” W x 23 3/4” D x 36 3/4” H [89cm x 58cm 92cm] 243 Single Door Cabinet A 24” [61cm] wide single door cabinet built of heavy gauge sheet steel with Resistop top. Full sized door allows...

A packing bench utilized for general lab procedures. Manufactured of heavy gauge sheet steel with an oven-cured, powder-coated finish, this bench has a myriad of uses in the laboratory. It is supplied with a Resistop work surface, a 6” vertical riser and two duplex electrical receptacles. Shipping Wgt.: 145 lbs. [65.8 kg] Dimensions: 42” W x 24 1/2” D x 32” H to work surface [107cm x 62cm x 81cm] Boilout bench is constructed of heavy gauge sheet steel with added structural supports to insure the secure containment of your boilout unit. Bench contains two front doors with louvers to allow...

Contact Handler for Custom Shelves designed to meet your needs. 222 Double Side Work Shelf 222DT Double Side/Double Tier Work Shelf Designed for placement on top of riser where benches are placed face to face. The shelf is constructed of heavy sheet steel and perforated steel. Built to hold case pans and finished in a baked, durable coating. Specify color when ordering. Shipping Wgt.: 75 lbs [34 Kg] Dimensions: 42” W x 15” D x 12” H [107cm x 38cm x 30cm] Designed for placement on top of riser where benches are placed face to face. The shelf is constructed of heavy sheet steel and perforated...

HANDLER YESTERDAY, TODAY AND TOMORROW It was the early 1900’s and the German emigrant owner of a small dental lab in Kearney, New Jersey was making vulcanite dentures and partials. Edward Handler knew there must be a better way to make removable dental appliances. He designed and had cast new styles of denture flasks that were easier to take apart and remove models. He designed a newer style and less expensive flask press. Both the “Donham Flask” and “Ideal Press” were a hit in the local dental lab market, so Ed decided to open a dental manufacturing facility at his location in Kearney. Ed...