Dissolution Specification – Media-Mate Plus

Product catalog summary

Specifications Overview:
The document provides detailed specifications for the Media-Mate Plus™ system by Hanson Research Corp. Key specifications include media tank volumes, weight, environmental conditions, electrical requirements, dimensions, materials, and performance metrics.

Tank Capacities:
- Usable media tank volume: 40 L (10.5 gal)
- Unusable media tank volume: 2 L (0.53 gal)
- Media volume to top of filter: 8 L (2.1 gal)
- Media volume when low water level sensor turns heater off: about 18 L

Weight:
- Main unit, dry: 67 kg (148 lb)
- Main unit with 40 L of media: 107 kg (236 lb)

Environmental Conditions:
- Max ambient temperature: 5° C below temperature setpoint
- Max humidity: <85%

Electrical Requirements:
- Voltage: 115 VAC or 230 VAC ± 10%, 50/60 Hz
- Current: 13 A (115 VAC) or 8 A (230 VAC), Single
- Fuses for 115 VAC Units: 1/2 A, 3/4 A, 8 A, 15 A
- Fuses for 230 VAC Units: 1/2 A, 3/8 A, 5 A, 8 A

Dimensions:
- Length: 80.9 cm (31.9 in.)
- Width: 53.4 cm (21.0 in.)
- Height: 114.0 cm (44.8 in.)

Wetted Materials:
- Tank: High density polyethylene
- Heater: Teflon® coated
- Filter: Polyethylene
- Flask: S.A.N. (Styrene/Acrylic/Nitrile)
- Fittings, Fill Hose: PVC
- Tubing: Stainless Steel and Tygon

Performance:
- Cycle time: <5 min
- Pre-heat temperature range: 30 to 45 °C
- Pre-heat temperature control accuracy: ±0.5 °C
- Pre-heat temperature readout accuracy: ±0.2 °C
- Pre-heat time (21-37 °C): 60 min
- Delivery volume range: 250 to 1000 mL
- Delivery volume accuracy: ±1.0%
- Deaeration: 95% saturation max
- Filtration: 5 micron nominal
Note: Accuracy may be improved by fine adjustment.

Catalog excerpts

Dissolution Specification – Media-Mate Plus-1

MEDIA-MATE PLUS™ WEIGHT Main unit, dry: Main unit with 40 L of media: SIZE Length: ELECTRICAL Voltage, Frequency: Current, Phase: Cycle time: Pre-heat temperature range: Delivery volume range: High density polyethylene Teﬂon® coated S.A.N. (Styrene/Acrylic/Nitrile) PVC Stainless Steel and Tygon Delivery volume accuracy: Note: Accuracy may be improved by ﬁne adjustment. TANK CAPACITIES Media tank volume (usable): Media tank volume (unusable): Media volume to top of ﬁlter: Max ambient temperature: 5° C below temperature setpoint Max humidity: Pre-heat temperature readout accuracy: Fittings, Fill Hose: Pre-heat temperature control accuracy: WETTED MATERIALS Tank: Media volume when low water level sensor turns heater off: Toll Free: 99-315-005 Rev. 8-15 | © Hanson Research Corp | This information is subject to change

Open the catalog to page 1

All Hanson Research Corporation catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list