*mymedicalexpo

Critical Care Crib

1 / 2 PagesView full catalog

Critical Care Crib

Product catalog summary

Specifications:

Recommended for patients up to 150 lbs maximum.
Electric adjustments: Head and knee elevation up to 35 degrees, Hi-Lo elevation up to 12 inches, Trendelenburg feature at 7 degrees.
Includes battery backup, CPR release, and Weighsafe scale.
Comes with a 5-inch pressure reduction mattress, 2 drop sides, and 2 drop end rails.

Features Included:

Add-on crib top with vinyl ceiling panel and under crib light.
Stainless steel oxygen tank holder and fitted sheets.
Additional epoxy colors available.

Options & Accessories:

4 IV poles and Portland access (2 per side).
Shelf with oxygen tank cutouts and 5-inch heavy-duty casters (2 steer, 2 brake).
Teething bars, wall bumper system, and anti-microbial confetti epoxy finish.

Construction & Assembly:

Steel construction with factory assembly.

Crib Dimensions:

PC741-A: Crib size without bumpers 30"x 60", with bumpers 35"x 65"; Mattress size 28"x 58"; Overall height 58"; Floor to mattress platform height 32"-44"; Side rails height 26"; Weight 339 lbs.
PC752-A: Crib size without bumpers 36"x 60", with bumpers 41"x 65"; Mattress size 34"x 58"; Overall height 58"; Floor to mattress platform height 32"-44"; Side rails height 26"; Weight 355 lbs.

Available Colors: Various epoxy colors available.

Catalog excerpts

230 Grider St, Buffalo, NY 14215 [email protected] 800-873-4273 http://www.hardmfg.com/hospitals/ CRITICAL CARE CRIB Our Critical Care Cribs are designed for the most complex patient care required in the NICU or PICU. This top of the line crib provides caregivers with complete patient access, full electric operation and an accurate built-in scale. FEATURES INCLUDED Electric Head Elevation to 35 Degrees Electric Knee Elevation to 35 Degrees Portland Access- 2 Per Side Electric Hi-Lo Elevation - up to 12" Shelf with Oxygen Tank Cut Outs Electric Trendelenburg Feature - 7 degrees 5" Heavy Duty Casters (2 Steer, 2 Brake) Battery Backup Teething Bars Wall Bumper System Weighsafe Scale Anti-Microbial Confetti Epoxy Finish 5" Pressure Reduction Mattress Steel Construction 2 Drop Sides & 2 Drop End Rails Factory Assembly OPTIONS & ACCESSORIES Add-On Crib Top Vinyl Ceiling Panel Under Crib Light Stainless Steel Oxygen Tank Holder Fitted Sheets Additional Epoxy Colors Available Recommended for Patients up to 150 lbs Maximum

Open the catalog to page 1

PC741-A Crib Size no Bumpers: 30"x 60" Crib Size with Bumpers: 35"x 65" Mattress Size: 28"x 58" Overall Crib Height: 58" Floor to Top of Mattress Platform Lowest Position: 32" Highest Position: 44" Height of Side Rails: 26" Crib Weight: 339 lbs PC752-A Crib Size no Bumpers: 36"x 60" Crib Size with Bumpers: 41"x 65" Mattress Size: 34"x 58" Overall Crib Height: 58" Floor to Top of Mattress Platform Lowest Position: 32" Highest Position: 44" Height of Side Rails: 26" Crib Weight: 355 lbs AVAILABLE COLORS

Open the catalog to page 2

All HARD Manufacturing CO., INC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list