Product catalog 17
64Pages

Product programme Dental equipment

Dear business partners, As an engineering company, we have been manufacturing dental equipment since 1964 with a reputation for high-quality technology. Birgit Harnisch Managing director Our equipment is clearly configured, technically sophisticated from the use of proven and robust components, precision engineered and of the highest quality. The ensuing and well-known reliability of our equipment is the prerequisite for trouble-free and efficient operation in your business. Based on this we are in the position to provide you with the security you require – especially in the integration of...

Steam blasting and polishing technology 5 Steam blasting units, two-chamber polishing box Spot blasting units / fine blasting units, sand blasting units, manual blasting units, blasting material Single-place, two-place and three-place extraction units Milling and measuring technology 37 Milling units, blocking and measuring units Vacuum mixers, vibrating units, pin drilling units, plaster model belt grinding units, dental model grinders

The palpable quality, endurance and precise functioning of Harnisch+Rieth equipment provide positive support to my daily work in the laboratory. Master dental technician / senior partner Jan Langner, Schwäbisch Gmünd

Steam blasting unit with permanent water connection Steam blasting unit with water tank for manual refilling Steam blasting unit

Steam blasting unit with permanent water connection Can be used either wall-mounted or tablemounted. 1. Spray guard and collection tray (obtainable as an option). 2. A large, clear manometer indicates the boiler pressure at any given time. The highly effective electronic descaling system enables the D-S 100 A to be operated with normal tap water. 3. A push-button is used to switch between dry steam and wet steam. When using wet steam, the water content can be adjusted using an infinitely variable valve. 5. A leakage protection system switches the unit off automatically if a malfunction...

Description The D-S 100 A steam blasting unit achieves a high level of quality and reliability. It enables straightforward and rapid cleaning, wax removal or thorough degreasing for any laboratory tasks that may arise. The D-S 100 A steam blasting unit has a permanent water connection and can also be refilled manually at any time. When the water supply is provided manually, the unit functions like the D-S 100 steam blasting unit. A highly effective heating system enables the unit to be ready to operate after only approximately 4-5 minutes of heating up time. Details The ergonomically...

Steam blasting unit with water tank for manual refilling Can be used either wall-mounted or tablemounted. 2 1. Spray guard and collection tray (obtainable as an option). 2. Normal tap water can be used for topping up at any time during operation. Time-consuming reduction of the boiler pressure is unnecessary. 3. Stainless-steel housing, painted. 4. A push-button is used to switch between dry steam and wet steam. When using wet steam, the water content can be adjusted using an infinitely variable valve. 5. Steam blasting is activated by the foot switch.

Steam blasting and polishing technology 8 | 9 Description The D-S 100 steam blasting unit largely equates to the D-S 100 A model, but is rather more simply constructed. Only manual water supply is possible for this unit. If the water tank is almost empty, an acoustic signal sounds and a display lights up. The signal persists until the water tank is refilled. The ergonomically designed and easy-to-hold hand piece is made from special, heat insulating, solid plastic. The thermal steam hose connected to the hand piece is extremely flexible and has a textile protective sleeve. Accessories Spray...

Steam blasting unit Can be used either wall-mounted or tablemounted. 1. Steam blasting is activated by the foot switch. 2. Signal lights on the panel provide reliable information about the heating status, steam readiness and possible lack of water. 3. Extremely quick heating time thanks to powerful heating system. The steam jet is ready to use after only 4-5 minutes. 4. Water supply is via a suction hose. Water is sucked from an external container (e.g. canister) by a water pump. 5. Stainless-steel housing, painted.

Steam blasting and polishing technology 10 | 11 Description The new models correspond to the current knowledge state and requirements for dental laboratories. They are technically developed and of the highest quality. Exclusive use of proven and reliable components guarantees malfunction-free and efficient working. The new A-S 80 steam blasting unit achieves a high level of quality and reliability. It is outstandingly suitable for rapid and thorough cleaning of instruments, as well as for complete removal of wax, grease, paste, adhesive and other residues. The steam blasting unit is...

Two-chamber polishing box with integrated / external extraction Integrated or external extraction. 1. Ergonomic workplace lighting for fatigue-free working. In addition two removable spray guard panels beneath the lighting (see illustration). 2. Powerful and maintenance-free threephase motor, with infinitely variable speed regulation 400 – 4,500 rpm. Automatic storage of the most recently set speed. Advantage: Ideal speed adjustment for different materials, such as metal or plastic. (Influence on heat sensitivity, expansion, etc.) Two fixed buttons for classic 1,500 rpm and 3,000 rpm

Description Our latest Harnisch+Rieth development for perfect and ergonomic dry and wet polishing. All metal and plastic dental technology components can be perfectly worked using the most up-to-date electronic control system. Highly compact construction needing little space: (W x D x H) 600 x 530 x 410 mm, robust stainless steel housing, partially painted grey-white. Details Integrated, very powerful noise insulated extraction unit with two large, easily accessible, fine-particle filter bags (only D-P 600). D-P 600 with integrated extraction unit D-P 600 0 for external extraction...