Amber Press Master
1 / 4Pages

Courtesy of CDT. Cristian Vordermayer All Ceramic Materials for All-Ceramic Restorations Christian Vordermayer Oral design Chiemsee / Gremany "Amber® Press Master is the best framework option for feldspathic porcelain powders. To make natural-like aesthetic teeth, It is the material you have been waiting for." Lithium Disilicate-Based High Fusion Press Ingots Uwe Gehringer Made by Uwe Gehringer Dental Laboratory / Germany "I have never used a better lithium disilicate combined with low fusing glass-ceramics than Amber® Press Master! In my opinion, there is no better material for frameworks in highly aesthetic cases that require extreme stability." Nondas Vlachopoulos AestheticLab® / Greece "Amber® Press Master, an exceptional material helping me manage the most important parameters for aesthetic cases, such as strength, opalescence, value, opacity, chameleodism, chroma, refraction, diffusion of the light." Cristian Petri Oral Design Clinic / Romania "Amber® Press Master is the missing link in the world of Lithium Disilicate and offers you unlimited possibilities at the correct value and translucency." HASS Corporation 77-14, Gwahakdanji-ro, Gangneung-si, Gangwon-do, KOREA 25452 Tel: +82-70-7712-1300 / Fax: +82-33-644-1231 Customer Support : +82-2-2083-1367 E-mail : hasscorp@hassbio.com Website : www.hassbio.com Printed in KOREA © HASS Corporation. All rights reserved. This material is designed for usage in dentistry. Follow instructions HASS is not liable for any loss caused by failure to comply with regulation or scope of indication. Users are responsible for testing products to verify the compatibility for any usage which are not written in the instructions. The explanations and data contained within do not carry any guarantees and/or obligations. All enclosed recommendations and restrictions apply when used with products from other manufacturers. AM_BR_IM_EN_210503

Thermal Stability Compatible with Various Veneering Materials E Product ingots are compatible with various veneering materials for lithium disilicate. Veneering materials (Pocerine Powder) Glass Transition Temperature(Tg) - IPS e.max ceram (Ivoclar Vivadent) * - VINTAGE LD Porcelain (Shofu) - MiYO (Jensen) * - Initial Zr-FS (GC) Core materials (Press Ingot) - Initial LiSi (GC) * - InSync (Jensen) * - EX-3 PRESS LF, CZR PRESS LF (Kuraray Noritake) * - Creation ZI-F (Creation Willi Geller) * Courtesy of CDT. Cristian Vordermayer * Not a registered trademark of HASS Corp. Rigid Framework for...

Mechanical Strength Excellent Aesthetics Dynamic loading geometry Less reaction Layer S-N Curve(Fatigue Test) After pressing, very little reaction layer remains on Amber® Press Master. There is no need to apply any acid for clean-up, thereby ensuring a simple and nonhazardous process. 200 * Creation ZI-F is a registered trademark of Creation. Willi Geller International GmbH. Experimental Method of Fatigue Test - Testing machine: Instron 5671 - Dynamic loading geometry: load 2~800 N, 10 Hz, ~5.0×106 cycles Aesthetic Outcomes with Amber® Press Master Highly Dense structure Approximately 2...

Create Your Masterpiece Available shades Product Line-up Dimensions (mm) Translucency plus) MT(Medium Translucency) Indications Translucent Anterior Single Crowns Posterior Single Crowns 3-Unit Bridge *up to the second Premolar Pressing Schedules Austromat 654 press-i-dent Heating Rate (°C/min) Pressing Duration Press level *Austromat 654 press-i-dent is a registered trademark of DEKEMA. Investment Ring Stand-by Temperature Temperature Increase Holding Temperature Holding time Stop Speed NOTE: The above schedules are referential guideline only *EP3000 is a registered trademark of Ivoclar...