All Ceramic Materials for All-Ceramic Restorations Product Line-up Dimensions (mm) with zirconia frameworks • Cantilever bridges • 3-unit anterior and posterior bridges • Maryland bridges • Long-span and curved bridges Lithium Disilicate-Based Press on Zirconia • Implant supported crowns and bridges Investment Ring Start Temp. Heating Rate Holding Time LT ※ Note : 1. There may be a difference between the displayed temperature and the real temperature of each furnace. When you use the Amber ingots, please verify the above standard schedue is suitable for your press furnace. If it is not, please try to find the optimum temperature through the following process. 1) If there are some traces of tiny bubble on the surface of the restoration ⇒ Please reduce the maximum temperature by 5~10℃ or holding time and try pressing again. 2) If the marginal area of the restoration is not formed completely ⇒ Please increase the maximum temperature by 5~10℃ or holding time and try pressing again. HASS Corporation 77-14, Gwahakdanji-ro, Gangneung-si, Gangwon-do, KOREA 25452 Tel: +82-70-7712-1300 / Fax: +82-33-644-1231 Customer Support : +82-2-2083-1367 E-mail : [email protected] Website : www.hassbio.com Printed in KOREA © HASS Corporation. All rights reserved. This material is designed for usage in dentistry. Follow instructions HASS is not liable for any loss caused by failure to comply with regulation or scope of indication. Users are responsible for testing products to verify the compatibility for any usage which are not written in the instructions. The explanations and data contained within do not carry any guarantees and/or obligations. All enclosed recommendations and restrictions apply when used with products from other manufacturers. LS_BR_

Most Innovative and Exciting Opening Up New Era of Dental Restorations Zirconia framework Easy Aesthetics & Superior Strength More Lifelike Amber® LiSi-POZ veneering has similar translucency to the enamel layer of natural teeth and the translucency of Zirconia framework is similar to that of dentin of natural teeth. The high asthetics of Amber® LiSi-POZ enables it to replace a damaged natural teeth perfectly. Restoration courtesy of Dr. Hee-kyong Lee Superior Strength The tensile bond strength between Zirconia framework and Amber® LiSi-POZ is over 45 MPa after pressing. Microtensile Bond Strength...